Tachometer electronic
Ratio display, 2 limits, analogue output
Large 14 mm display LED, 6-digits, programmable
TA202
Features
– Tachometer for 2 rotation speeds/velocities
– Display 6-digits
– Connection: Two one-channel digital sensors or
potential-free contact
– Two limits
– Ratio display, peak value memory
– Impulse evaluation programmable
– Input F1 with phase evaluation
– Interface RS232, RS422 or RS485
TA202 - LED-Tachometer
Technical data - electrical ratings
Description
Two limits „P1“/„P2“ that can be assigned at will enable
monitoring of production processes. Two tachos to capture
and display rotation speed and velocity as “F1” and “F2”.
“F3” allows recall and display of a programmed calculating
function, for example ratio, difference, stretching/shrinking,
flow, time elapsed with start and stop signal, impulse rate
measurement, period or impulse duration.
Voltage supply
115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
Power consumption
Sensor supply
Display
7 VA, 5 W
12...26 VDC / max. 100 mA
LED, 7-segment display
6-digits
Number of digits
Digit height
Technical data - electrical ratings
14 mm
Emitted interference
Interference immunity
DIN EN 61000-6-3
DIN EN 61000-6-2
Unit displayed
Function
1/s, 1/min, 1/h programmable
Tachometer, ratio display
Period duration measurement
Programmable
parameters
Assignment F1, F2 or F3
Calculating functions
2 limits, analogue output
Slave pointer
Measuring principle
Calculating functions
Difference F1-F2
Ratio F1:F2
Stretch-/shrinking (F2-F1):F1
Flow
Approvals
UL/cUL, CE conform
Pulse rate measurement
Signal inputs
Comparator inputs
NPN / PNP
Technical data - mechanical design
Input logic
Operating temperature
Storing temperature
Relative humidity
E-connection
0...+50 °C
Control inputs
Control functions
Counting frequency
Scaling factor
2 Inputs
-20...+70 °C
Start, Stop
80 % non-condensing
Plug-in screw terminals
1.5 mm²
F1: 10 kHz / F2: 25 Hz, 40 kHz
0.0001...9999.99
>10 years in EEPROM
Optocoupler
Core cross-section
Data memory
Protection DIN EN 60529 IP 65 face with seal
Outputs electronic
Analogue output
Operation / keypad
Housing type
Membrane with softkeys
2 analogue outputs
0(2)...10 V, 0(4)...20 mA
Resolution 12 bit
Housing for control panel
installation
Dimensions W x H x L
Cutout dimensions
Installation depth
Mounting
96 x 48 x 124 mm
97 x 45 mm (+0.6)
123.75 mm
Temp. coeffic. typ. ±20 ppm/°C
Outputs relay
Interfaces
Potential-free change-over
contact
RS232, RS422, RS485
Front panel installation by clip
frame
Standard
Protection class II
DIN EN 61010-1
Overvoltage category II
Pollution degree 2
Weight approx.
Material
350 g (AC), 250 g (DC)
Housing: Makrolon 6485 (PC)
www.baumerivo.com
1