SXN15 Series
S i n g l e o u t p u t
DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters
1
• High efficiency topology, 87% typical at 5V
• Wide operating temperature, up to and exceeding 70˚C
(natural convection)
• 90% to 110% output trim
• No minimum load
• Overvoltage protection
• Remote on/off control
The SXN15 is a new high efficiency open frame isolated 15 Watt converter
series in an industry standard footprint. The first four models in the series
feature an input voltage range of 33 to 75VDC and are available in output
voltages of 5V, 3.3V, 2.5V and 1.8V. The output voltage on each model is
adjustable from 90% to 110% of the nominal value. Typical efficiencies for
the models are 87% for the 5V, 86% for the 3.3V, 85% for the 2.5V and
83% for the 1.8V version. The SXN15 series also has a remote on/off
capability with active high or active low logic. Overcurrent and overvoltage
protection features are included as standard. With full international safety
approval including EN60950 and cUL1950, the SXN15 reduces compliance
costs and time to market.
TÜV
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Voltage adjustability
90% to 110%
3.5% max.
Conducted emissions
EN55022 (See Note 3)
EN55022 (See Note 3)
EN55022 (See Longform Data Sheet) Level B
Level A
Level B
Total error band
(See Note 11)
Radiated emissions
Immunity:
ESD air
ESD contact
Radiated field enclosure EN61000-4-3 10V/m
Conducted (DC power) EN61000-4-6 10V
Line regulation
Low line to high line
1V8 and 2V5 models
3V3 and S05 models
0.5% max.
0.1% max.
EN61000-4-2 8kV, 15kV
EN61000-4-2 6kV, 8kV
Load regulation
Full load to min. load
1V8 model
2.0% max.
1.5% max.
0.5% max.
2V5 model
3V3 and S05 models
Conducted (signal)
Input transients
EN61000-4-6 10V
ETS 300 132-2, ETR 283
(See Note 10)
Minimum load
0%
Overshoot
At turn-on and turn-off
1V8 and 2V5 models
3V3 and S05 models
3.5% max.
None
GENERAL SPECIFICATIONS
Efficiency
See table
1500VDC
Undershoot
None
Ripple and noise
(See Note 1)
5Hz to 20MHz
1V8 and 2V5 models
3V3 and S05 models
40mV pk-pk
14mV rms
70mV pk-p
20mV rms
Operational insulation
Switching frequency
Input/output
Fixed
265kHz typ.
Approvals and
standards
(See Note 5)
UL/cUL1950, EN60950
TÜV Rheinland
Transient response
(See Note 2)
typ. deviation
1V8 and 2V5 models
3V3 and S05 models
150mV
100mV
400µs recovery to
Material flammability
Weight
UL94V-0
12g (0.42oz)
within total error band
INPUT SPECIFICATIONS
Input voltage range
Input current
MTBF
MIL-HDBK-217F
>600,000 hours
48Vin nominal
33 to 75VDC
Representative model: 48S05 @ 48Vin, 40°C,
100% load ground benign
No load
Remote OFF
35mA max.
25mA max.
BELLCORE 332
>1,500,000 hours
Input current (max.)
Input reflected ripple
(See Note 4)
0.55A max. @ Io max.
and Vin = 33 to 75V
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 9)
Operating ambient
temp. (3.3V and 5V)
Operating ambient
temp. (1.8V and 2.5V)
-40°C to +65°C
-40°C to +70°C
-40°C to +120°C
(See Note 6)
5mA (pk-pk) typ.
Active high remote ON/OFF
(See Note 8)
Open collector ref to -input
Open circuit or >2VDC
<1.2VDC
Logic compatibility
ON
OFF
Non-operating
(All models)
Undervoltage lockout
Power up
Power down
33V (typ.)
30V (typ.)
Start-up time
(See Note 7)
Power up
Remote ON/OFF
1.5ms (typ.)
2.5ms (typ.)
File Name: SXN15S.PDF Rev: 16 Oct 2002