STR485E
Datasheet
3.3 V RS485 compatible with 1.8 V I/Os and selectable speed 20 Mbps or 250
kbps
Features
•
•
•
•
•
•
•
•
•
•
•
•
Half-duplex RS485 transceiver
1.65 V to 3.6 V supply for data and enable signals
3 V to 3.6 V supply for bus supply
DFN10 3 x 3
High speed: up to 20 Mbps data rate
Low speed selected by SLR pin : 250 kbps
Up to 128 transceivers on the bus @ 125 °C
Fail safe receiver (bus open, idle and shorted)
Thermal shutdown protection
Product status link
Low quiescent current in shutdown mode
Extended temperature range : -40 °C to +125 °C
Available in industry standard DFN10
Bus-pin protection more than:
STR485E
–
–
–
–
±4 kV HBM protection
±8 kV IEC61000-4-2 contact discharge
±16 kV IEC61000-4-2 air discharge
Compliant IEC61000-4-4 fast transient burst Class B
Description
The STR485E is a low power differential line transceiver for data transmission
standard RS485 applications in half-duplex mode. Data and enable signals are
compatible with 1.8 V or 3.3 V supplies.
Two speeds are selectable through SLR pin: fast data rate up to 20 Mbps or slow
data rate for extended cable running to 250 kbps.
Excessive power dissipation caused by bus contention or faults is prevented by
thermal shutdown circuit that forces the driver outputs into a high impedance state.
The receiver has a fail-safe feature, which guarantees a high output state when the
inputs are left open, shorted or idle.
DS13051 - Rev 4 - November 2023
www.st.com
For further information contact your local STMicroelectronics sales office.