RT5016C
Features
Power Converter Unit
SEQ # 4 : CH1 CH4 CH3 CH2
SEQ # 5 : CH1 CH4 CH2 CH3
All Power Switches Integrated with Internal
Compensation
CH1 LV Sync Step-Up
Support Up to 1A Loading, DVS (Dynamic Voltage
Scaling), Load-Disconnect, Up to 95% Efficiency,
PSM/PWM Selectable
Discharge Output of Every Channel when Turning
Off
CH2 LV Sync Step-Up/Down
Wake Up Impulse to Monitor BAT and VIN Plug-In
Fixed 2MHz Switching Frequency for CH1/3/4/5,
Fixed 1MHz Switching Frequency for CH2/7
Charger Unit
Support Up to 1A Loading, DVS, Up to 95%
Efficiency, PSM/PWM Selectable
CH3/4 LV Sync Step-Down
Support Up to 3A (CH3) / 2A (CH4) Loading, DVS,
Up to 95% Efficiency, 100% (MAX)Duty Cycle, PSM/
PWM Selectable
28V Maximum Rating for VIN Power
Selectable Power Input Current Limit (0.1A / 0.5A /
1A / 1.5A)
CH5 LV Sync Step-Down
Auto Power Path Management (APPM) with
Integrated Power MOSFETs
Support Up to 0.6A Loading, Up to 95% Efficiency,
100% (MAX) Duty Cycle
Battery Charging Current Control and Regulation
Voltage Control
Output Voltage can be Selected from Preset List
or Set by External Feedback Network
CH6 Low Input Power LDO
Programmable Charging Current and Safe Charge
Timer
VIN Range 1.5V to 5.5V
Output Voltage Level Selectable in I2C Register
CH7 WLED Driver in Either Sync Step-Up Operation
or Current Regulator Operation
Optimized Charge Rate via Thermal Feedback
Under-Voltage Protection, Over-Voltage Protection
Charger Status and VIN Power GOOD Indicators
Interrupt Indicator to JEITA Temperature/Fault/
Status Events when PMU is Enabled
Battery Temperature Events
Step-Up Mode with LED Open Protection (OVP7
16V or 25V, Selectable in I2C Register)
Step-Up Mode Support Series 2 to 6 WLED and
Load Disconnect Function
Battery Removing Event
Charger in Thermal Regulation Control
Safety Timer Timeout
Current Regulator Mode for 1 WLED
31 WLED Dimming Levels
End of Charging
Automatic Mode Selection by External Circuit
Topology
VIN Power Good
VIN < DPM Threshold 4.35V
CH8 Generic LDO
Charger Type Detection Finishing
Charger Type Detection
VIN Range 1.5V to 5.5V
Output Voltage Level Selectable in I2C Register
CH9 Low Quiescent LDO with Reverse Leakage
Prevention for RTC Power Supply
Fixed 3.05V Output
Dedicated Charger : Support Apple and Sony
Charger
Secondary Charger Detection to Distinguish DCP
I2C Control Interface : Support Fast Mode up to
400kb/s
Six Preset Power On/Off Sequences by One Pin
SEQ
RoHS Compliant and Halogen Free
SEQ # 0 : CH2 CH3 CH4
SEQ # 1 : CH1 CH3 CH2 CH4
SEQ # 2 : CH1 CH3 CH4 CH2
SEQ # 3 : CH1 CH2 CH4 CH3
Copyright 2016 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
2
DS5016C-02 November 2016