RS2G126
RS2G126 Dual Bus Buffer Gate With 3-State Outputs
1 FEATURES
3 DESCRIPTIONS
The dual buffer is designed for 1.65V to 5.5V VCC
operation. The RS2G126 device is dual line drivers
with 3-state output. The outputs are disabled when
the output-enable input is low.
•
•
•
Operating Voltage Range:1.65V to 5.5V
Low Power Consumption:1µA (Max)
Operating Temperature Range:
-40°C to +125°C
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
•
•
•
Inputs Accept Voltage to 5.5V
±24mA Output Drive at VCC=3.0V
ESD Protection Exceeds JESD 22
- 4000-V Human-Body Model (A114)
- 200-V Machine Model (A115)
- 1000-V Charged-Device Model (JS-002)
Latch-up Performance Exceeds 100mA
PACKAGE: MSOP-8, TSSOP-8
To ensure the high-impedance state during power up
or power down, OE should be tied to GND through a
pulldown resistor, the minimum value of the resistor is
determined by the current-sourcing capability of the
driver.
•
•
The RS2G126 is available in Green MSOP-8 and
TSSOP-8 package. It operates over an ambient
temperature range of -40°C to +125°C.
2 APPLICATIONS
•
•
•
•
•
•
•
•
AV Receiver
Cable Modem Termination Systems
Digital Picture Frame (DPF)
High-Speed Data Acquisition and Generation
Motor Controls: High-Voltage
Personal Navigation Device (GPS)
Portable Media Player
Device Information (1)
PART NUMBER
PACKAGE
MSOP-8
TSSOP-8
BODY SIZE (NOM)
3.00mm×3.00mm
4.40mm×3.00mm
RS2G126
(1) For all available packages, see the orderable addendum at the
end of the data sheet.
Video Communication Systems
4 FUNCTION TABLE
INPUTS
OUTPUT
Y
Simplified Schematic
OE
A
1OE
1A
H
H
L
H
L
H
L
1Y
X
Z
H=HIGH Logic Level
L =LOW Logic Level
X=Don’t Care
2OE
2A
Z=High-impedance OFF-state
2Y
REV A.5
1 / 14
www.run-ic.com