RS2G241
RS2G241 Dual Buffer and Driver With 3-State Outputs
1 FEATURES
3 DESCRIPTIONS
This dual buffer and line driver is designed for 1.65V
to 5.5V VCC operation.
•
•
•
Operating Voltage Range:1.65V to 5.5V
Low Power Consumption:1µA (Max)
Operating Temperature Range:
-40°C to +125°C
The RS2G241 device is designed specifically to
improve both the performance and density of 3-state
memory-address drivers, clock drivers, and bus-
oriented receivers and transmitters.
•
•
•
Input Accept Voltage to 5.5V
High Output Drive: ±24mA at VCC=3.0V
Ioff Supports Partial-Power-Down Mode
Operation
The RS2G241 device is organized as two 1bit line
̅̅̅̅
drivers with separate output-enable (1 OE , 2OE)
̅̅̅̅
inputs. When 1OE is low and 2OE is high, the device
•
Micro SIZE PACKAGES: MSOP-8, VSSOP-8
passes data from the A inputs to the Y outputs. When
̅̅̅̅
1OE is high and 2OE is low, the outputs are in the
high-impedance state.
2 APPLICATIONS
•
•
•
•
•
•
•
AC Receiver
To ensure the high-impedance state during power up
Blu-ray Players and Home Theaters
Desktops or Notebook PCs
Digital Video Cameras (DVC)
Mobile Phones
̅̅̅̅
or power down, OE should be tied to VCC through a
pullup resistor, and OE should be tied to GND through
a pulldown resistor; the minimum value of the resistor
is determined by the current-sinking or the current-
sourcing capability of the driver.
Personal Navigation Device (GPS)
Portable Media Player
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
Functional Block Diagram
1
Device Information (1)
1OE
PART NUMBER
PACKAGE
BODY SIZE (NOM)
3.00mm×3.00mm
2.00mm×2.30mm
MSOP-8
2
6
RS2G241
1A
1Y
VSSOP-8
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
7
2OE
2A
5
3
2Y
REV A.1
1 / 17
www.run-ic.com