APPLICABLE STANDARD
-25 C TO
+85 C
-10
C TO
+60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 350 V , DC 490 V
5 A
CURRENT
APPLICABLE CABLE
φ8±0.2
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
X
X
X
X
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
ELECTRIC CHARACTERISTICS
7 m MAX.
X
X
X
X
X
X
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
1000 M MIN.
INSULATION RESISTANCE
500 V DC.
VOLTAGE PROOF
1000 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
BY STEEL GAUGE.
INSERTION AND WITHDRAWAL FORCES : - N.
INSERTION AND WITHDRAWAL FORCES : 50 N MAX.
CONTACT RESISTANCE: 10 m MAX.
-
-
-
WITHDRAWAL FORCES
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
LOCKING DEVICE WITH UNLOOK.
X
MECHANICAL OPERATION
1000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
VIBRATION
SHOCK
FREQUENCY:10 TO 55 Hz,SINGLE AMPLITUDE 0.75 mm,
m/s2 AT 2 h FOR 3 DIRECTIONS.
490 m/s2 DURATIONS OF PULSE 11 ms AT 3 TIMES
FOR 6 DIRECTIONS.
X
X
-
-
CONTACT RETENTION
FORCE
APPLYING A PULL FORCE THE WIRE AFTER THE
50 N MIN.
APPLICABLE CRIMPED CONTACT IS ASSEMBLED THE BODY.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 10 MΩ MIN
(AT HIGH HUMIDITY).
X
X
-
-
(STEADY STATE)
② INSULATION RESISTANCE:100 MΩ MIN (AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 100 MΩ MIN..
② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
TIME 30 → 10 TO 15 → 30 → 10 TO 15 min
UNDER 5 CYCLES.
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
EXPOSED AT + 85 ℃ , 96 h.
CORROSION SALT MIST
DRY HEAT
NO HEAVY CORROSIN RUIN THE FUNCTION.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
X
-
-
-
COLD
EXPOSED AT - 55 ℃ , 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
HY.KOBAYASHI
HY.KOBAYASHI
18.02.22
18.02.22
NOTES (1) R/T : ROOM TEMPERATURE
(2) ABOVE SPECIFICATIONS SHOWS THE VALUES IN ASSEMBLED CONDITION WITH
APPLICABLE CRIMP CONTACTS.
DESIGNED
DRAWN
HY.KISHI
MK.INOUE
18.02.21
18.02.06
Unless otherwise specified, refer to IEC 60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-007928-31-00
RM15TPN-10PC(31)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL109-0712-7-31
FORM HD0011-2-1