MODEL: R7L
■ Recommended solderless terminal
LonWorks SYSTEM REQUIREMENTS
• LonMaker Turbo Edition Ver.3.2 or higher + LonMaker
Turbo Service Pack 4.0 or higher
3.3 (.13) max
• LonMark Resource File Ver.13 or higher
mm (inch)
GENERAL SPECIFICATIONS
■ Common Specifications
■ I/O Status Indicator
• Discrete I/O
Power input:
Discrete I/O modules have LED indicators showing I/O signal
status.
24 V AC ±10 % (50 / 60 Hz)
24 V DC ±10 %; ripple 10 %p-p max.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute
(between isolated circuits)
• Analog I/O
Analog I/O modules have LED indicators showing network
variable status assigned to fbLED.
(Refer to the instruction manual for details)
■ Service Switch
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Storage temperature: -20 to +65°C (-4 to +149°F)
Mounting: DIN rail (35 mm wide)
Used to identify the node in LonWorks network
configuration.
■ Reset Switch
Used to reset the Neuron Chip. Press the switch behind the
front cover to reset.
Connection: M3 separable screw terminals
(torque 0.5 N·m)
Control functions are halted while completing resetting and
restarting. Confirm no danger before conducting resetting.
Screw terminal material: Nickel-plated steel
Solderless terminal: Refer to the drawing at the end of the
section.
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
LonWorks COMMUNICATION
Neuron Chip: FT3120 (NeuronID printed in numeric and bar
code [peel-off code 39 format] under the specification
marking on the product; two sticker labels attached)
Transceiver: FT-X1 (equivalent to FTT10A)
Transmission speed: 78 kbps
Applicable wire size: 0.25 to 1.65 mm (AWG22 to 16)
2
Housing material: Flame-resistant resin (gray)
Status indicator: PWR, ONLINE, ERR, TX/RX, SVCE
(Refer to the instruction manual for details)
■ Current Consumption & Weight
Twisted-pair cable
Current consumption at 24 V AC / 24 V DC
R7L-DA16: 70 mA / 40 mA; 200 g (7.1 oz)
R7L-DC16A: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-DC16B: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-DAC16: 75 mA / 45 mA; 200 g (7.1 oz)
R7L-SV4: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-TS4: 85 mA / 50 mA; 200 g (7.1 oz)
R7L-RS4: 85 mA / 50 mA; 200 g (7.1 oz)
R7L-YV2: 110 mA / 70 mA; 200 g (7.1 oz)
R7L-YS2: 180 mA / 110 mA; 200 g (7.1 oz)
R7L-RR8: 75 mA / 50 mA; 200 g (7.1 oz)
R7L-EA8: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EA16: 30 mA / 20 mA; 150 g (5.3 oz)
R7L-EC8A: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EC16A: 30 mA 20 mA; 150 g (5.3 oz)
R7L-EC8B: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EC16B: 30 mA / 20 mA; 150 g (5.3 oz)
Distance, free topology: 500 meters
Max. 64 nodes/channel
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 2/26
http://www.m-system.co.jp/