PWA_(M)D-3W&PWB_(M)D-3W Series
3W, WIDE INPUT, ISOLATED & REGULATED
DUAL/SINGLE OUTPUT DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
PRODUCT PROGRAM
Wide (4:1) Input Range
Input
Output
Part
Number
Efficiency
(%, Typ)
Operating Temperature: -40°C to +85°C
1500VDC isolation
Short circuit protection(automatic recovery)
Internal SMD construction
UL94-V0 package
No external component required
Industry Standard Pinout
Five sided metal shielding (PWA/B_MD)
MTBF>1,000,000 hours
Voltage (VDC)
Current (mA)
No-load Voltage
(mA)(typ) (VDC)
Nominal Range Max*
Max
±300
±125
±100
909
Min
±30
±12
±10
90
PWA2405(M)D-3W
PWA2412(M)D-3W
PWA2415(M)D-3W
PWB2403(M)D-3W
PWB2405(M)D-3W
PWB2412(M)D-3W
PWB2415(M)D-3W
PWA4805(M)D-3W
PWA4812(M)D-3W
PWA4815(M)D-3W
PWB4803(M)D-3W
PWB4805(M)D-3W
PWB4812(M)D-3W
PWB4815(M)D-3W
±5
76
80
80
74
76
80
80
76
80
80
74
78
80
80
±12
±15
24
9.0-36
40
16
3.3
5
600
60
12
15
±5
±12
±15
3.3
5
250
25
RoHS compliance
200
20
±300
±125
±100
909
±30
±12
±10
90
APPLICATIONS
The PWA_(M)D-3W & PWB_(M)D-3W Series
are specially designed for applications where a
wide range input voltage power supplies are
48
18-72
80
8
600
60
12
15
250
25
isolated from the input power supply in
a
200
20
distributed power supply system on a circuit
board. These products apply to:
1) Where the voltage of the input power supply
is wide range (voltage range≤ 4:1);
2) Where isolation is necessary between input
and output (isolation≤1500VDC);
* Input voltage over it may cause permanent damage to the device.
Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically.
Operation under 10% load will not damage the converter; However, they may not meet all specification
listed.
3) Where the regulation of the output voltage
and the output ripple noise are demanded.
OUTPUT SPECIFICATIONS
Item
Test conditions
Min
0.3
Typ
Max
3
Units
W
Output power
See below products program
MODEL SELECTION
PWB2412MD-3W
Positive voltage accuracy Refer to recommended circuit
Negative voltage accuracy Refer to recommended circuit
±1
±3
±3
±5
Rated Power
Package Style
Output Voltage
%
Load regulation
From 10% to 100% load
±0.5
±0.2
±1*
±0.5
Line regulation
Input Voltage From Low to High
Refer to recommended circuit
20MHz bandwidth
Input Voltage
Temperature drift (Vout)
Ripple & Noise**
±0.03 %/°C
150 mVp-p
KHz
Product Series
75
Switching frequency
Isolation capacitance
100% load, nominal input voltage
300
100
pF
MORNSUN Science & Technology co.,Ltd.
*Dual output models unbalanced load: ±5%.
** Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax: 86-20-38601272
Http://www.mornsun-power.com
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
PWA_(M)D-3W&PWB_(M)D-3W
A/0-2008
Page 1 of 2