DATA SHEET | FEBRUARY 2006
PONA 2100 Series EDFA Rev B
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013
Mains Conducted Emissions
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
EN 60950
Low Voltage Directives
EN 60825-1
EN 60825-2
CDRH
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Ordering Information
PONA21
-
-
-
-
Optical
Output
Power
Output
Ports
Input Voltage
Connector
GFF/ NF options
00 - Standard
14 - 14 dBm
17 - 17 dBm
1
2
AC – 90-260V 50/60 Hz SC - SC/APC
DC – - 48 V
FC - FC/APC
01 - Standard with Gain Flattened option
20 - 20 dBm
22 - 22 dBm
24 - 24 dBm
26 - 26 dBm
27 - 27 dBm
4
8
EC - E2000/APC
TC - SC/UPC
GC - FC/UPC
02 - Standard with Low NF option
03 - Low NF and Gain Flattened
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.ortel.com
Ortel, a division of EMCORE
4 of 4
© Copyright 2005. EMCORE Corporation