PD100
Table 2: Absolute Maximum Ratings
PARAMETER
MIN
MAX
5
UNIT
mA
μA
V
Forward Current
Reverse Current
Reverse Voltage
Optical input power
-
-
-
-
500
30
5
mW
ºC
Operating Case Temperature
Storage Temperature
-40
-40
-
+85
+85
+250
ºC
Soldering temperature (10 seconds)
ºC
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied
under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PACKAGE DIMENSIONS – PD100-003-100 and PD100-003-105
Dimensions: INCHES [mm]
ORDERING INFORMATION
Table 3: Standard
Part Number
PD100-003-100
PD100-003-105
Options
TO46, 3pin, non AR coated, gold plated lens cap
TO46, 3pin, non AR coated, gold plated flat window cap
Table 4: Custom
Part Number
Options
PD100-003-0xx
Custom defined size and electrical layout.
Package: TO46, TO56, 2 or 3 pin.
PD100-003-1xx
Cap: Window or lens. AR or Non-AR coated. Gold or nickel plated.
Pigtailed: TO46, 2 or 3 pin. Fiber length, 0.5 meter, 1.0 meter
Fiber type: Multimode, single mode (SMF-28) or custom supplied
Connector Type: SC, ST or FC. APC or UPC
Receptacle, 2 or 3 pin. SC, ST or FC aligned
PD100-003-3xx
PD100-003-5xx
Please contact Anadigics for the specific part number and pinout that suits your needs
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any
time without notice. The product specifications contained in Advanced Product Information sheets and
Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in
ANADIGICS, Inc.
829 Flynn Road
Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS
assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
Camarillo, California 93012, U.S.A.
Tel: +1 (805) 445-4500
Fax: +1 (805) 445-4502
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of
an ANADIGICS product in any such application without written consent is prohibited.
Rev 1.0
2