OTS-1SD2A
™
Optiva Standard, 1 SDI 270 Mbps
and 2 Analog Audio
SDI Video and Audio Transmission
The OTS-1SD2A provides for the digital
transmission of 1 Channel of uncompressed
SDI Video and 2 Channels of Analog Audio.
System Design
Video
Audio
Data
2 Audio
2 Audio
Each insert card comes with a label
identifying the specific protocols
handled, connector pin-out and other
vital information.
Analog In
Analog Out
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva™ Desktop
Card Racks (OT-DTCR Series).
A
L
E
R
T
S
A
L
E
R
T
S
T
A
T
U
S
T
A
T
U
S
SDI Video
In
SDI Video
Out
For optimal bandwidth allocation,
each insert card can daisy-chain with
an additional card in the same chassis.
See “Optiva™ Upgrade Path”.
ST, LC,
SC or FC
ST, LC,
SC or FC
The Optiva™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
™
™
Optiav
Optiav
VAD Transmission
VAD Transmission
OTS-1SDT2AT
Features
OTS-1SDR2AR
• Uncompressed SDI Video and 2 Analog Audio channels over
one fiber
• TDM - Single Wavelength
Optiva™ Upgrade Path
• Complies with SMPTE standards for Video and Audio
transmission
This system can be purchased without
an optical port as an add-on to an existing
Optiva™ system daisy-chain.
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
(See “Non-Optical Version” below).
• No EMI or RFI and no ground loops
The Optiva™ bandwidth requirement
of this system is 361 Mbps.
• Stand alone or rack-mount
• Ideal for Broadcast/Studio and Professional AV applications
Versions Available*
Wavelength (nm)
& Fiber
Optical
Connector
Optical Budget Range***
Transmit**
Receive**
(dB)
(km)
Form Factor
1310 Multimode
1310 Singlemode
OTS-1SDT2AT-A1-XX-IC
OTS-1SDT2AT-A2-XX-IC
OTS-1SDT2AT-A2D-XX-IC
OTS-1SDT2AT-A3-XX-IC
OTS-1SDT2AT-A3D-XX-IC
OTS-1SDT2AT-L4-XX-IC
OTS-1SDR2AR-A1-XX-IC
OTS-1SDR2AR-A2-XX-IC
OTS-1SDR2AR-A2D-XX-IC
OTS-1SDR2AR-A3-XX-IC
OTS-1SDR2AR-A3D-XX-IC
OTS-1SDR2AR-L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
7
3
10
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
1310 Singlemode (D)
1550 Singlemode
12
20
17
40
1550 Singlemode(D)
1270-1610 SM (CWDM)
25
60
Varies
20-70
Non-Optical Version
OTS-1SDTSAT-NOC-IC
OTS-1SDR2AR-NOC-IC
N/A
N/A
N/A
IC (1-slot)
Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm;
"ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z.
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
