Datasheet > MS27488-20-2

MS27488-20-2

更新时间： 2024-02-19 02:57:35

品牌	Logo	应用领域
埃梯梯 - ITT		连接器连接器支架
页数	文件大小	规格书
36页	2879K
描述
Cannon MIL-DTL-38999 Connectors

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MS27488-20-2 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	风险等级：	1.68
Is Samacsys：	N	连接器支架类型：	CONNECTOR ACCESSORY
Base Number Matches：	1

MS27488-20-2 数据手册

Cannon KJL/KJ/KJA/KJB

MIL-DTL-38999 Series I, II, III Connectors

Assembly Instructions

Wire Stripping

Wire Size

Strip insulation from end of wire to be crimped.

(See table for proper stripping dimensions.) Do not

cut or damage wire strands.

22D or 22M*

.125 (3.18)

.188 (4.77)

* For reference only

Contact Crimping

VISUAL INSPECTION HOLE

2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert

contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The

tool will not release unless the crimp indentors in the tool head have been fully actuated.

1. Insert stripped wire into contact crimp pot.

Wire must be visible thru inspection hole.

3. Release crimped contact and wire from tool. Be

certain the wire is visible thru inspection hole in

contact.

Contact Insertion

2. Using proper plastic or metal insertion tool for

corresponding contact, position wire in tip of the tool

so that the tool tip butts up against the contact

shoulder.

3. Press tool against contact shoulder and, with

firm and even pressure, insert wired contact and

tool tip into center contact cavity. A slight click may

be heard as metal retaining tines snap into place

behind contact shoulder.

1. Remove hardware from plug or receptacle and

slip over wire bundle in proper order for

reassembly.

5. After all contacts are inserted, fill any empty

cavities with wire sealing plugs, Ressemble plug

or receptacle hardware.

4. Remove tool and pull back lightly on wire to make

sure contact is properly seated. Repeat operation with

remainder of contacts to be inserted, beginning with

the center cavity and working outward in alternating

rows.

Contact Extraction

1. Remove hardware from plug or receptacle

and slide hardware back along wire bundle.

2. Using plastic or metal extraction tool with proper

color code corresponding to contact size, place wire in

tool.

3. Insert tool into contact cavity until tool tip

bottoms against the contact shoulder, expanding

clip retaining tines.

4. Hold wire firmly in tool and extract wired

contact and tool. Repeat operation for all

contacts to be extracted.

5. Fill any empty wire cavities with wire sealing plugs, and

6. Reassemble plug or receptacle.

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

1...29 30 313233 34 35 36

中文翻译

下载PDF

与MS27488-20-2相关器件

型号	品牌	获取价格	描述	数据表
MS27488-22	AMPHENOL	获取价格	Connector Accessory, Seal Plug
MS27488-22-2	ITT	获取价格	Cannon MIL-DTL-38999 Connectors
MS27488-22-2	AMPHENOL	获取价格	Connector Accessory
MS27488-4-1	AMPHENOL	获取价格	Matrix MS/Standard MIL-DTL-5015 Cylindrical Connectors
MS27488-8	AMPHENOL	获取价格	Connector Accessory, Seal Plug
MS27488-8-1	AMPHENOL	获取价格	Matrix MS/Standard MIL-DTL-5015 Cylindrical Connectors
MS27488-8-3	GLENAIR	获取价格	Connector Accessory,
MS27490-12	AMPHENOL	获取价格	Connector Accessory
MS27496	GLENAIR	获取价格	Military Standard Connector Index
MS27496E11A13P	AMPHENOL	获取价格	MIL Series Connector, 13 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle

与MS27488-20-2相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

8
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

12
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

6
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

6

产品中心

服务支持

精选活动

关于我们

帮助中心

MS27488-20-2

MS27488-20-2 技术参数

MS27488-20-2 数据手册

与MS27488-20-2相关器件

与MS27488-20-2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MS27488-20-2

MS27488-20-2 技术参数

MS27488-20-2 数据手册

与MS27488-20-2相关器件

与MS27488-20-2相关文章

您还可以找

您在本页遇到什么问题？