Datasheet > MPX4105A

MPX4105A

更新时间： 2024-01-10 03:25:51

品牌	Logo	应用领域
飞思卡尔 - FREESCALE		传感器换能器压力传感器
页数	文件大小	规格书
7页	178K
描述
Integrated Silicon Pressure Sensor for Manifold Absolute Pressure Applications On-Chip Signal Conditioned

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPX4105A 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
包装说明：	PLASTIC, UNIBODY PACKAGE-6	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.82	最大精度 (%)：	1.8%
其他特性：	TEMPERATURE COMPENSATED, SIGNAL CONDITION	主体宽度：	5.33 mm
主体高度：	13.31 mm	主体长度或直径：	15.55 mm
外壳：	PLASTIC	线性度 (%)：	1.8 %
安装特点：	THROUGH HOLE MOUNT	标称偏移：	0.30V
最大工作电流：	10 mA	最高工作温度：	125 °C
最低工作温度：	-40 °C	输出范围：	0.30-4.90V
输出类型：	ANALOG VOLTAGE	封装形状/形式：	ROUND
端口类型：	HOLE	最大压力范围：	15.2 Psi
最小压力范围：	2.2 Psi	压力传感模式：	ABSOLUTE
响应时间：	1000 µs	灵敏度（mV / V）：	51 mV/V
传感器/换能器类型：	PRESSURE SENSOR,PEIZORESISTIVE	最大供电电压：	5.35 V
最小供电电压：	4.85 V	表面贴装：	NO
端接类型：	SOLDER	Base Number Matches：	1

MPX4105A 数据手册

Document Number: MPX4105A

Rev 6, 07/2006

Freescale Semiconductor

Technical Data

Integrated Silicon Pressure Sensor

for Manifold Absolute Pressure

Applications On-Chip Signal

Conditioned, Temperature

MPX4105A

SERIES

Compensated and Calibrated

The Freescale MPX4105A series Manifold Absolute Pressure (MAP) sensor

for engine control is designed to sense absolute air pressure within the intake

manifold. This measurement can be used to compute the amount of fuel required

for each cylinder.

INTEGRATED

PRESSURE SENSOR

15 TO 105 kPA (2.2 TO 15.2 psi)

0.3 TO 4.9 V OUTPUT

Freescale’s MAP sensor integrates on-chip, bipolar op amp circuitry and thin

film resistor networks to provide a high output signal and temperature

compensation. The small form factor and high reliability of on-chip integration

make the Freescale MAP sensor a logical and economical choice for the

automotive system designer.

UNIBODY PACKAGE

The MPX4105A series piezoresistive transducer is a state-of-the-art,

monolithic, signal conditioned, silicon pressure sensor. This sensor combines

advanced micromachining techniques, thin film metallization, and bipolar

semiconductor processing to provide an accurate, high level analog output signal

that is proportional to applied pressure.

Figure 1 shows a block diagram of the internal circuitry integrated on a

pressure sensor chip.

Features

MPX4105A

CASE 867-08

•

1.8% Maximum Error Over 0° to 85°C

Specifically Designed for Intake Manifold Absolute

Pressure Sensing in Engine Control Systems

•

Temperature Compensated Over –40 to +125°C

PIN NUMBERS⁽¹⁾

Durable Epoxy Unibody Element

V_out

N/C

Typical Applications

GND

V_S

N/C

•

Manifold Sensing for Automotive Systems

Ideally Suited for Microprocessor or Microcontroller-Based Systems

Also Ideal for Non-Automotive Applications

1. Pins 4, 5, and 6 are internal device

connections. Do not connect to external

circuitry or ground. Pin 1 is noted by the

notch in the lead.

ORDERING INFORMATION

MPX Series

Device Type

Options

Case No.

Device Marking

Order No.

UNIBODY PACKAGE (MPX4105A SERIES)

Basic Element

Absolute,

Element

867

MPX4105A

12 3 4 5 6 7

下载PDF

与MPX4105A相关器件

型号	品牌	描述	获取价格	数据表
MPX4115	MOTOROLA	OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 15 to 115kPa (2.18 to 16.7 psi) 0.2 to 4.8 V	获取价格
MPX4115A	MOTOROLA	OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 15 to 115kPa (2.18 to 16.7 psi) 0.2 to 4.8 V	获取价格
MPX4115A	FREESCALE	Integrated Silicon Pressure Sensor for Manifold Absolute Pressure,Altimeter or Baromater A	获取价格
MPX4115A	NXP	Pressure Sensor, 5.1V, 15/115kPa, Sensor 6, Tray	获取价格
MPX4115A6U	NXP	ABSOLUTE, PEIZORESISTIVE PRESSURE SENSOR, 2.18-16.67Psi, 1.5%, 0.20-4.80V, ROUND, THROUGH	获取价格
MPX4115AP	FREESCALE	Integrated Silicon Pressure Sensor for Manifold Absolute Pressure,Altimeter or Baromater A	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

MPX4105A

MPX4105A 技术参数

MPX4105A 数据手册

与MPX4105A相关器件

与MPX4105A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPX4105A

MPX4105A 技术参数

MPX4105A 数据手册

与MPX4105A相关器件

与MPX4105A相关文章

您还可以找

您在本页遇到什么问题？