MPQ7200A
42V, 1.2A Buck-Boost or 3A Buck,
410kHz with FSS, Synchronous LED Driver,
AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPQ7200A is a fixed-frequency, constant
current buck-boost LED driver with integrated
power MOSFETs. It offers a very compact
solution to achieve 1.2A of continuous output
current (IOUT), with excellent load and line
regulation across a wide input supply range. The
MPQ7200A can also be configured for buck
mode to provide up to 3A of continuous load
current.
•
Built for a Wide Range of Automotive
LED Applications:
o Wide 6V to 42V Operating Input Range
o PWM Dimming (Dimming Frequency
from 100Hz to 2kHz)
o Internal 500Hz Two-Step Dimming with
Configurable Duty Cycle
o Available in AEC-Q100 Grade 1
High Performance for Improved
Thermals:
o Configurable LED Current without
Sensing Resistor
o 44mΩ/40mΩ Low RDS(ON) Internal Power
MOSFETs
o High-Efficiency Synchronous Mode
Optimized for EMC/EMI:
o Default 410kHz Switching Frequency
(fSW) with Spread Spectrum
o EMI Reduction Technique
Full Protection Features:
o LED Short (to GND and Battery), LED
Open, and Output OVP with Fault
Indication
o OCP with Latch-Off Mode
o Configurable Thermal Derating
o Thermal Shutdown
•
Constant frequency hysteretic control mode
provides extremely fast transient response
without loop compensation.
Full protection features include over-current
protection (OCP), output over-voltage protection
(OVP) and under-voltage protection (UVP),
thermal derating (TD), and thermal shutdown
(TSD). The fault indicator outputs an active logic
low signal if a fault condition occurs.
•
•
The MPQ7200A requires a minimal number of
readily available, standard external components,
and is available in a space-saving QFN-19
(3mmx4mm) package.
•
•
Fast Control Loop:
o Band-Band Control
Additional Features:
o Configurable 1.2A in Buck-Boost Mode
or 3A in Buck Mode
o 5% LED Current Accuracy from 700mA
to 1.2A for Buck-Boost or 1A to 2A for
Buck
o Available in a QFN-19 (3mmx4mm)
Package with Wettable Flank
APPLICATIONS
• Turn Indicator Lights
• Daytime Running Lights (DRLs)
• Fog Lights
• Rear Lights
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPQ7200A Rev. 1.0
11/1/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1