MPQ6400
Low Quiescent Current
Programmable-Delay Voltage Supervisor
AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPQ6400 is a microprocessor (µP)
supervisory circuit which can monitor and
provide a reset function for system voltages
from 0.4V. When either the SENSE voltage falls
below its threshold (VIT) or the voltage of
•
•
•
•
•
•
•
•
•
•
Fixed Voltage Threshold from 0.9V to 5V
Adjustable Voltage Threshold from 0.4V
Low Quiescent Current: 1.6μA (Typ)
Adjustable Reset Delay Time: 2.1ms to 10s
High Threshold Accuracy: ±1% (Typ)
manual reset (
) is pulled to a logic low, the
MR
Manual Reset (
) Input
Output
MR
signal will be asserted. Fixed voltage
RESET
Open-Drain
RESET
threshold options set by the factory are
available for standard voltage rails between
0.9V and 5V, while the MPQ6400DG(J)-01
allows for an adjustable voltage threshold with
an external resistor divider. When the SENSE
Immune to Short Negative SENSE Voltage
Guaranteed Reset Valid to VCC=0.8V
Available in QFN-6 (2mmx2mm) and
TSOT23-6 Packages
•
Available in AEC-Q100 Qualified
voltage and
exceed their respective
is pulled up to logic high
MR
thresholds,
RESET
APPLICATIONS
•
after a user-programmable delay time.
Advanced Driver Assistance Systems
(ADAS)
Body Control Modules
Infotainment Systems
Low Quiescent Current Systems
Electric Vehicles
The MPQ6400 has a very low quiescent current
of 1.6μA typically, which makes it ideal suitable
for battery-powered applications. The device
features a precision reference to achieve ±1%
threshold accuracy. The reset delay time is set
by an external capacitor connected between
CDELAY and GND, allowing the user to select any
delay time between 2.1ms and 10s. The 380ms
delay time is set by connecting the CDELAY pin to
VCC. The 24ms delay time is set by floating the
CDELAY pin. The MPQ6400 is available in QFN-6
(2mmx2mm) and TSOT23-6 packages.
•
•
•
•
•
MCU/DSP/FPGA/ASIC Applications
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
TYPICAL APPLICATION
MPQ6400 Rev. 1.2
10/23/2023
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2023 MPS. All Rights Reserved.
1