MPM81204
16V, Quad-Output, Step-Down Power Module
with Dual 5A and Dual 12A Outputs
DESCRIPTION
FEATURES
The MPM81204 is a quad-output, step-down
power module with dual 12A and dual 5A
outputs. It can achieve high efficiency across a
wide output current (IOUT) range, and has a wide
4V to 16V input voltage (VIN) range.
•
•
Wide 4V to 16V Input Supply Range
Dual 12A DC Outputs from 0.6V to 3.3V
(Channel 0 and Channel 3)
Dual 5A DC Outputs from 0.6V to 5.5V
(Channel 1 and Channel 2)
Constant-On-Time (COT) Control for Fast
Transient Response
Stable with Zero-ESR Output Capacitors
Forced Continuous Conduction Mode
(FCCM)
•
•
Constant-on-time (COT) control provides fast
transient response and easy loop stabilization.
•
•
The configurable switching frequency (fSW) can
be set at 600kHz, 800kHz, or 1000kHz via a
resistor. This allows the device to maintain a
constant fSW, regardless of the input and output
voltages.
•
•
Excellent Load Regulation
Output Voltage (VOUT) Tracking and
Discharge
Four open-drain power good (PG) signals
indicate the whether the outputs are within the
normal voltage range. If the input supply fails to
power the device, then an external pull-up
voltage clamps the PGx pin’s voltage (VPG) at
about 0.7V.
•
PG Clamped Low Voltage during Power
Failure
Configurable Soft-Start Time (tSS)
Pre-Biased Start-Up
600kHz, 800kHz, or 1000kHz Selectable
Switching Frequency (fSW)
•
•
•
•
Non-Latch Over-Current Protection (OCP),
Over-Voltage Protection (OVP), Under-
Voltage Lockout (UVLO) Protection, and
Thermal Shutdown
Full protection features include over-current
protection (OCP), over-voltage protection
(OVP),
under-voltage
lockout
(UVLO)
protection, and thermal shutdown.
•
Available in a BGA
(9.5mmx16mmx4.98mm) Package
The MPM81204 requires a minimal number of
readily available, standard external
components, and is available in a BGA
(9.5mmx16mmx4.98mm) package.
APPLICATIONS
•
•
•
•
Telecommunication Systems
Networking Systems
Servers
Base Stations
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPM81204 Rev. 1.0
9/29/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1