MPM3806
5.5V, 1A, Synchronous Step-Down
Power Module, AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPM3806 is an easy-to-use, fully
integrated, synchronous step-down power
module with a built-in inductor and power
MOSFETs. It can achieve up to 1A of continuous
output current (IOUT), with excellent load and line
regulation.
•
Designed for Automotive Applications:
o Wide 2.5V to 5.5V Operating VIN Range
o Up to 1A Output Current (IOUT
o 1% Feedback (FB) Accuracy
o -40°C to +150°C TJ Range
)
o Available in AEC-Q100 Grade 1
•
Increased Battery Life:
o 21μA Sleep Mode IQ
Constant-on-time (COT) control provides fast
transient response and eases loop stabilization.
Fault protections include cycle-by-cycle current
limiting and thermal shutdown. An open-drain
power good (PG) signal indicates that the output
voltage (VOUT) exceeds 90% of its nominal
voltage.
o Advance Asynchronous Modulation
(AAM) Mode for Increased Efficiency
under Light-Load Conditions
High Performance for Improved Thermals:
o 75mΩ and 45mΩ Integrated Internal
Power MOSFETs
Optimized for EMC and EMI Reduction:
o 2.4MHz Switching Frequency (fSW)
o MeshConnectTM Flip-Chip Package
Optimized for Board Size and BOM:
o Integrated Internal Power MOSFETs
o Integrated Compensation Network
o Fixed-Output Options (1): 0.8V, 1V, 1.1V,
1.2V, 1.25V, 1.5V, 1.8V, 2.5V, 2.8V, and
3.3V
•
•
•
The MPM3806 is ideal for a wide range of
applications, including high-performance digital
signal processors (DSPs), advanced driver
assistance system (ADAS) sensors, portable
and mobile devices, and other low-power
systems with constrained area.
The MPM3806 requires a minimal number of
readily available, standard external components,
and is available in
a
small QFN-15
o Available in a QFN-15
(3mmx4mmx1.6mm) package.
(3mmx4mmx1.6mm) Package
•
Additional Features:
o Enable (EN) for Power Sequencing
o Power Good (PG)
o 100% Duty Cycle
o External Soft Start (SS) Control
o Output Discharge
o OVP and SCP with Hiccup Mode
o Available in a Wettable Flank Package
Note:
1) See the Ordering Information section on page 3 for the
availability of each fixed-output version. Contact an MPS FAE
for details on additional output voltage (VOUT) options.
APPLICATIONS
•
•
•
•
Camera Modules
ADAS Sensors
Automotive Infotainment Systems
Automotive V2X
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPM3806 Rev. 1.0
11/7/2022
MonolithicPower.com
1
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.