MP7200
42V, 1.2A Buck-Boost or 3A Buck
Synchronous LED Driver
DESCRIPTION
FEATURES
The MP7200 is a high-frequency, constant-
current, buck-boost LED driver with integrated
power MOSFETs. It offers a very compact
solution to achieve up to 1.2A of continuous
output current, with excellent load and line
regulation across a wide input supply range. The
MP7200 can also be configured to buck mode to
provide up to 3A of constant load current.
Wide 6V to 42V Operating Input Range
44mΩ/40mΩ Low RDS(ON) Internal Power
MOSFETs
High-Efficiency Synchronous Mode
Operation
Configurable 1.2A Buck-Boost or 3A Buck
Mode
Configurable LED Current without Current-
Sense Resistor
Default 2.3MHz Switching Frequency for
Buck Mode and 1.15MHz Switching
Frequency for Buck-Boost Mode with
Spread Spectrum
PWM Dimming (Dimming Frequency from
100Hz to 2kHz)
Internal 500Hz Two-Step Dimming with
Configurable Duty Cycle
Fault Indication for LED Short (to GND and
Battery) and Open, Output Over-Voltage,
and Thermal Shutdown
Constant frequency hysteretic control mode
provides extremely fast transient response
without loop compensation. The switching
frequency goes up to a fixed 2.3MHz in buck
mode to reduce the current ripple and improve
EMI, and down to 1.15MHz in buck-boost mode
to optimize efficiency and thermal performance.
Full protection features include over-current
protection (OCP), output over-voltage (OV) and
under-voltage (UV), thermal derating (TD), and
thermal shutdown (TSD). The fault indicator
outputs an active logic low signal if a fault
condition occurs.
Over-Current Protection (OCP) with Latch-
Off Mode
Configurable Thermal Derating via NTC
Remote Temperature Sense
EMI Reduction Technique
The MP7200 requires a minimal number of
readily available, standard external components,
and is available in a space-saving QFN-19
(3mmx4mm) package.
Available in a QFN-19 (3mmx4mm)
Package with Wettable Flanks
APPLICATIONS
Turn Indicator Lights
Daytime Running Lights (DRLs)
Fog Lights
Rear Lights
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP7200 Rev. 1.0
1/21/2021
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1