NXP Semiconductors
Data Sheet: Technical Data
K02P64M100SFA
Rev. 4, 08/2016
Kinetis K02 64 KB/128 KB Flash
MK02FN128VLH10
100 MHz ARM® Cortex®-M4 Based Microcontroller with FPU
MK02FN128VLF10
MK02FN128VFM10
MK02FN64VLH10
MK02FN64VLF10
MK02FN64VFM10
Ideal for low-power applications that require processing
efficiency and high peripheral integration. These devices share
the comprehensive enablement and scalability of the Kinetis
family.
This product offers:
• Run power consumption down to 117.5 µA/MHz and static
power consumption down to 2.8 µA with full state retention
and 5.7 µs wakeup. Lowest static mode down to 70 nA.
• Excellent processing efficiency, 100 MHz ARM® Cortex®-
M4-based device with floating-point unit in a tiny form factor
64 LQFP (LH)
10 x 10 x 1.4 Pitch 0.5 7 x 7 x 1.4 Pitch 0.5
mm mm
48 LQFP (LF)
32 QFN (FM)
5 x 5 x 1 Pitch 0.5 mm
Performance
• 100 MHz ARM Cortex-M4 core with DSP instructions
Analog modules
• One 16-bit SAR ADC (1.2 MS/s in 12bit mode)
• One 12-bit DAC
delivering 1.25 Dhrystone MIPS per MHz
• Two analog comparators (CMP) with 6- bit DAC
• Accurate internal voltage reference (not available in
32-pin QFN package)
Memories and memory interfaces
• Up to 128 KB of embedded flash and 16 KB of RAM
• Preprogrammed Kinetis flashloader for one-time, in-
system factory programming
Communication interfaces
• One SPI module
System peripherals
• Two UART modules
• Flexible low-power modes, multiple wake up sources
• 4-channel DMA controller
• One I2C: Support for up to 1 Mbps operation
• Independent External and Software Watchdog monitor Timers
• One 6-channel general-purpose/PWM timer
Clocks
• Crystal oscillator: 32-40 kHz or 3-32 MHz
• Two 2-channel general-purpose timers with
quadrature decoder functionality (FTM2 does not
have external pins on the 32-pin QFN or the 48-pin
LQFP package)
• Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz
• Multi-purpose clock generator with FLL
• Periodic interrupt timers
• 16-bit low-power timer
• Programmable delay block
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
• Flash access control to protect proprietary software
Operating Characteristics
• Voltage range (including flash writes): 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
Human-machine interface
• Up to 46 general-purpose I/O (GPIO)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.
5秒后页面跳转
TDA2030音频功率放大器：资料手册参数分析
74HC595移位寄存器芯片：参数深入解析与应用实践指南
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
