MHP8564
(Formerly SAT8564 Series)
(Consult Table 3 for Part Number Designations)
Table 3 – MODEL NUMBER FUNCTIONALITY CHART
PACKAGE TYPE
SIP
OUTPUT TYPE
OTHER FUNCTIONALLTY
FORMER P/N
Output
Remote
Sense
Note B
Voltage
MODEL NUMBER
NOTES
Adj
Fixed
Enable Parallelable
Internal
Range
Note 2
Note 8
Note B
Pin
Note A
Compensation
MHP8564A$&*
MHP8564F$&*
MHP8564R$&*
MHP8564S$&*
4 Amp Series
4 Amp Series
4 Amp Series
4 Amp Series
Note C
Note C
Note C
0.5 – 4V
1.2 – 4V
1.2 – 4V
0.5 – 4V
SAT8564A-4$F-ADJ
SAT8564F-4$F-x.y
SAT8564R-4$F-x.y
SAT8564S-4$F-ADJ
NO
Replace “$” with letter to denote required screening level
C = COTS
M = MILITARY
S = SPACE
NOTE A: Parallelable devices have a synchronizing pin
so that units can be driven out of phase from each other
for the purpose of input and output Voltage Bus ripple
reduction. Other functions necessary for Paralleling are
also available
Replace “&” with lead bend option
Blank = No lead bend
-1 = SMT lead bend
-2 = lead bend down
-3 = lead bend up
-4 = space saving SMT lead bend
NOTE B: Fixed and remote sense part numbers must be
appendaged with fixed value of output Voltage.
Example: MHP8564F$&-1.8 for a 1.8V fixed output.
Replace “*” with lead finish option
Blank = Gold plate
NOTE C: Sync PIN is available. Other functions
necessary for Paralleling are not available.
S = Solder dip over gold plate
T4-LDS-0117 Rev. 14 (05/21/13)
©2013 Microsemi Corporation
Page 4 of 12