Momentary Action Switches
MCS 18 Front
https://www.schurter.com /PG09
Membrane Switch Frontpanel Short Stroke 18 mm
Membrane Switch Frontpanel Short Stroke 18
Membrane Switch Frontpanel Short Stroke 18
Membrane Switch Frontpanel Short Stroke 18
mm
mm
mm
square
White, lettered
round
red, lettered
round
green
See below:
Approvals and Compliances
Description
Weblinks
- Momentary action switch available in version square or round in diffe-
pdf data sheet, html datasheet, General Product Information, CAD-
Drawings, Product News, Detailed request for product
rent colours
- High lifetime with 5 million actuations
- Front and rear tested to degree of protection IP65 Snap-in type from
front side
- Solder terminals
Unique Selling Proposition
- Unique mechanical switches with tactile feedback
- Small mounting depth
- Various lettering options
Technical Data
Electrical Data
Mechanical Data
Impulse Withstand Voltage
(ESD)
16 kV
Actuating Force
Actuating Travel
End Stop Strength
Lifetime
Mounting screw torque
Climatical Data
Operating Temperature
Storage Temperature
IP-Protection
3
1 N
0.5 0.1 mm
> 50 N
> 1 million actuations
8N/cm
Contact Material Silver
Switching Voltage
Switching current
Rated Switching Capacity
Lifetime
min. 5 VDC , max. 48 VDC
max. 125 mA
0.72 W
> 1 million actuations at Rated Swit-
ching Capacity
< 50mΩ
-25°C to 60°C
-25°C to 60°C
IP65 (only with accessory kit)
Contact Resistance
< 150 mΩ after lifetime
> 100 MΩ
typ. 0.1 ms
Other Data
Insulation Resistance
Duration of Bounce
Contact Material Gold
Switching Voltage
Switching current
Rated Switching Capacity
Lifetime
Contact Material
Soldering Data
Solderability
Ag / Au
235°C / 2sec (IEC 60068-2-20 Test Ta
Method 1)
min. 50 mVDC, max. 24 VDC
max. 80 mA
0.36 W
> 1 million actuations at Rated Swit-
ching Capacity
< 50 mΩ
< 150 mΩ after lifetime
> 100 MΩ
typ. 0.1 ms
Resistance to Soldering Heat 260°C / 5 sec (IEC 60068-2-20 Test Tb
Method 1A)
Material
Housing
Socket
Bezel
Thermoplastic (PES)
Thermoplastic (PES)
Thermoplastic (PBT)
CuZn37 3 μm Ni 2 μm Au; CuZn37 2.5
μm Ag
Contact Resistance
Insulation Resistance
Duration of Bounce
Contact
Soldering Aid
Tin-plated
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Switches