Click here to ask an associate for production status of specific part numbers.
11µV
Low-Noise, 500mA LDO Linear
MAX38911/MAX38912
RMS
Regulators with Low-Power Mode
General Description
Benefits and Features
The MAX38911/MAX38912 are low-noise, high-PSRR
PMOS linear regulators that deliver up to 500mA load
•
Delivers Wide, Flexible Operating Range
• 1.7V to 5.5V Input Supply Range
• 0.8V to 5.0V Output Voltage Range
• 500mA Maximum Output Current
• 24.3mV Dropout at 500mA Load and 5.0V Input
Voltage
current with only 11µV
of output noise from 10Hz to
RMS
100kHz.
The regulators are fully protected from damage by
internal circuitry that provides programmable inrush
current limiting, output overcurrent limiting, reverse
current limiting, and thermal overload protection.
• 19.2µA No-Load Supply Current in Low-Power
Mode
• 332µA Supply Current in Normal Mode
• <1µA Shutdown Supply Current
The MAX38911 is available in WLP and TDFN packages
and are default factory preprogrammed to an output
voltage of 1.8V. Custom fixed-output voltage levels in
the range of 0.8V to 5.0V in 50mV steps are also
available, see Ordering Information.
•
•
Reduces Noise and Improves Accuracy
• 11µV
Output Noise, 10Hz to 100kHz
RMS
• 70dB PSRR at 10kHz, 250mA Load Current, and
300mV Input and Output Voltage Separation
• ±1% DC Accuracy over Load, Line,
and Temperature Variations
MAX38912 provides enhanced flexibility with adjustable
output voltage in the range of 0.8V to 5.0V by using two
external feedback resistors.
Enables Ease-of-Use and Robust Protection
• Stable with 2µF (Minimum Effective) Output
Capacitance
• Programmable Soft-Start Rate
• Overcurrent and Overtemperature Protection
• Reverse-Current Protection
The MAX38911ANT is packaged in a 1.42mm x
0.83mm, 3 x 2, 6-bump, 0.4mm pitch WLP, while the
MAX38911ATA and MAX38912ATA are packaged in a
8-pin, 2mm x 2mm TDFN.
Applications
• Power-OK Output
•
•
•
•
Mobile Phones
•
Reduces Size and Improves Reliability
• 1.42mm x 0.83mm, 3 x 2, 6-Bump, 0.4mm Pitch
WLP
• 2mm x 2mm, 8-Pin TDFN Package
• -40°C to +125°C Operating Temperature
Digital Camera and Audio Devices
Portable and Battery-Powered Equipment
High-Performance Sensors for Portable
Applications
•
•
IOT Sensors
Imaging and High-Frequency Sensors
Ordering Information appears at end of data sheet
Application Diagram
OUT
IN
IN
OUT
BYP
PREPROGRAMMED
TO 1.8V UPTO 0.5A
2.1V TO 5.5V
C1
4.7µF
C2
10nF
C3
4.7µF
GND
MAX38911
WLP
ACTIVE-HIGH
ENABLE
EN
NORMAL
MODE
LPM
19-100886; Rev 1; 8/21
© 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2021 Analog Devices, Inc. All rights reserved.