Triple/Dual-Mode
CDMA LNA/Mixers
Pin Description
PIN
NAME
FUNCTION
MAX2323
MAX2325
LNA Bias-Setting Pin. For nominal bias, connect a 24kΩ resistor to ground. This
resistor value can be adjusted to alter the linearity of the input LNA in high-gain,
high-linearity CDMA modes.
1
1
RLNA
—
2, 10, 23
N.C.
No Connection. Leave this pin floating.
High-Band RF Input Port. Blocking capacitor is required, which may be used as part of
the matching network.
2
—
PLNAIN
3, 8, 11,
12, 13, 18,
24, 25, 27
3, 8, 11, 12,
13, 17, 18,
24, 25, 27
GND
Ground
Low-Band RF Input Port. Blocking capacitor is required, which may be used as part of
the matching network.
4
4
CLNAIN
5
6
7
5
6
7
SLEEP
G2
Logic Input. High shuts off entire device.
Logic Input. See Tables 1 and 2 for details.
Logic Input. See Tables 1 and 2 for details.
G1
Low-Frequency LO Input Port. Requires blocking capacitor, which may be used as
part of an optional matching network.
9
9
LOLIN
High-Frequency LO Input Port. Requires blocking capacitor, which may be used as
part of an optional matching network.
10
14
15
—
14
15
LOHIN
MODE
FMOUT
Logic Input. See Tables 1 and 2 for details.
FM IF Output Port. Requires a pull-up inductor and a DC blocking capacitor, which
may be used as part of the matching network.
16
17
16
V
2.7V to 3.6V Supply Pin. Must be capacitively bypassed near the pin.
Logic Input. High selects high band (PCS). Low selects low band (cellular).
CC
—
BAND
CDMA-,
CDMA+
Differential Output Port for CDMA Mode. Requires pull-up inductors and blocking
capacitors, which may be used as part of the matching network.
19, 20
21
19, 20
21
Bias Setting Pin. For nominal bias, connect a 20kΩ resistor to ground. This resistor
value can be adjusted to alter the linearity of the mixers in all modes and the LNA in all
modes except high gain and high linearity.
RBIAS
Low-Band Mixer Input Port. Requires blocking capacitor, which may be used as part of
the matching network.
22
23
22
CMIXIN
PMIXIN
High-Band Mixer Input Port. Requires blocking capacitor, which may be used as part
of the matching network.
—
High-Band LNA Output Port. This port requires an external pull-up inductor and series
capacitor as part of the matching network.
26
—
PLNAOUT
—
V
2.7 to 3.6V Supply Pin. Bypassing is not necessary at this pin.
26
CC
_______________________________________________________________________________________
5