SPECIFICATION FOR 3.2x2.5mm 3.3V LVDS SMT OSCILLATOR
MtronPTI P/N: M2065S007
Electrical Specifications:
Parameter
Symbol
Min.
Typ.
Max.
Units
Conditions
Frequency of Operation
FO
156.250000
MHz
Frequency Stability
including calibration tolerance at
+25C and deviation over operating
temperature range
Frequency Stability
-25
+25
ppm
F/F
RF Output
LVDS Compatible
100 ohms between the two outputs
55
Output Type
Output Load
Symmetry (duty cycle)
Differential Output
Voltage
TDC
45
%
@ 50% of waveform
peak-to-peak differential
output voltage
247
350
454
mV
Output Offset Voltage
Logic Level “1”
Logic Level “0”
1.125
1.250
1.430
1.100
1.375
1.600
V
V
V
0.900
From 20% to 80% of
differential waveform
Rise/Fall Time
TR/TF
1.0
10
ns
Start-Up Time
5
ms
70% Vcc min. or no connection: outputs enabled
30% Vcc max.: outputs disabled
Pad 1
Pad 1
Output Enable/Disable
Function Pad 1
Supply Voltage & Power Consumption
Operating Voltage
Operating Current
VCC
ICC
3.135
3.300
3.465
V
mA
50
Other Parameters
Integrated phase noise,
12 kHz – 20 MHz
Phase Jitter
0.3
ps
Environmental & Package Specifications:
Operating Temperature
Operating Temperature
Storage Temperature
Mechanical Shock
Vibration
Thermal Cycle
Hermeticity
Solderability
TA
TS
-40
-55
+85
+125
°C
°C
-55 to +125 °C
Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave)
Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz)
Per MIL-STD-883, Method 1010, B (-55°C to 125°C, 15 min. dwell, 10 cycles)
Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium)
Per EIAJ-STD-002
Max. Soldering
Conditions
See solder profile, Figure 1.
2.50 mm (typ) X 3.20 mm (typ) X 1.10 (max) mm 6-pad leadless ceramic.
RoHS compliant.
Package Type
Page 1 of 3
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without written permission from MtronPTI.