M02061-12/-21
3.3 or 5 Volt Laser Driver
Rev V6
Ordering Information
Part Number
Package
Pin Configuration
M02061-12
M02061G-12*
M02061-21
QFN24
QFN24 (RoHS Compliant)
QFN24
DISDLY function on pin 8
DISDLY function on pin 8
SCB function on pin 8
SCB function on pin 8
DISDLY function on pin 8
M02061G-21*
M02061-EVM
QFN24 (RoHS Compliant)
Combination Optical and Electrical Evaluation board
*The G in the part number indicates that this is an RoHS compliant package.
Revision History
Revision
Level
Date
Description
V6
V5
Release
Release
May 2015
Updated logos and page layout. No content changes.
November 2014
Add Figure 4-2 . Recommended component values for AC coupling Laser. Change data sheet marking and
numbering to the MACOM system.
G (V4)
F (V3)
Release
Release
July 2012
Added recommendation for 100 k Ω pull-up resistor at pin 14 IBIASout when pin 18 SVCC is used to control
laser current.
February 2010
Added CPRI data rates to front page.
Added T specification and added equation for T specification in Table 1-1.
J
A
E (V2)
D (V1)
Release
Release
February 2006
Added information for the M02061-21 with pin SCB instead of pin DISDLY.
September 2005 New format. Remove 32 pin package information.
Changes to Absolute Maximum Specifications - operating temperature, output voltage.
Changes to Recommended Operating Conditions - VCC, operating temperature.
Changes to DC Characteristics - ICC, VMD, TxPWRmon, logic inputs and outputs, data inputs, safety logic
thresholds.
Changes to AC Characteristics - IMOD, Tr, Tf, jitter.
Added eye diagram, ; corrected rise/fall times.
C
Preliminary
March 2004
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support