LTM4712
36V , 12A Step-Up/Step-Down
IN
Buck-Boost µModule Regulator
FEATURES
DESCRIPTION
The LTM®4712 is a high efficiency buck-boost µMod-
ule® (micromodule) regulator. The switching controller,
power switches, inductor and support components are
included in the package. The complete design requires
only a few external components, including a resistor to
set frequency, a resistor to set output voltage, input, and
output capacitors, a sensing resistor to achieve input or
output average current regulation. The LTM4712 operates
over a 5V to 36V input voltage range and can regulate
output voltages between 1V and 36V.
n
Complete Buck-Boost Switch Mode Power Supply
OUT
Wide Input Voltage Range: 5V to 36V
n
n
n
n
V
Equal, Greater, Less Than V
IN
Wide Output Voltage Range: 1V to 36V
12A in Buck and Buck-Boost Mode, 6A under 12V
IN
and 24V
OUT
n
n
n
n
n
n
n
n
n
n
Up to 98% Efficiency
Peak Current Mode Control
Adjustable Input or Output Average Current Limits
Input or Output Current Monitoring
Power Good Output Signal
The LTM4712 supports selectable forced continuous
mode (FCM)/pulse-skipping mode (PSM) operation. The
current mode control enables a fast transient response
to line and load changes without sacrificing stability. The
SYNC input and CLKOUT output allow easy synchroniza-
tion. It supports multi-phase parallel operation for high
power applications.
Parallelable for Increased Output Current
Phase-Lockable Fixed Frequency: 100kHz to 600kHz
Selectable Forced Continuous/Pulse-Skipping Modes
V
is Disconnected from V During Shutdown
OUT
IN
16mm ×16mm × 8.34mm BGA Package
APPLICATIONS
The LTM4712 is offered in a 16mm × 16mm × 8.34mm
ball grid array (BGA) package suitable for automated
assembly by standard surface mount equipment. The
LTM4712 is RoHS-compliant.
n
Telecom, Servers and Networking Equipment
n
Industrial Control
n
High Power Battery-Operated Devices
All registered trademarks and trademarks are the property of their respective owners.
TYPICAL APPLICATION
12VOUT from 5VIN to 36VIN Buck-Boost Regulator
Efficiency and Power Loss vs VIN
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀ0
ꢀ
ꢀ
ꢄ ꢅꢆꢀ
ꢀ
ꢀ
ꢁꢂꢃ
ꢁꢂꢃ
ꢀ
ꢀ
ꢁꢂꢃ
ꢁꢂ
ꢁꢂ
ꢃꢀ ꢄꢅ ꢆꢇꢀ
ꢄꢅ ꢆ
ꢀ0ꢁꢂ
ꢃꢄ
ꢀ00ꢁꢂ
ꢃꢄ
ꢀꢁꢁꢂꢃꢂꢀꢄꢃꢅ
ꢀꢁꢂꢃ
ꢄꢄ
ꢂꢇ ꢃꢁ
ꢄꢅꢈ
Rꢀꢁ
ꢀꢁ
ꢀ.0ꢀꢁ
ꢀꢀ
0.ꢀꢁꢂ
ꢀꢁꢂꢃꢄꢅꢆ
ꢀꢁꢂ
ꢀꢁꢂꢃ
ꢀ
ꢀꢁꢂ
ꢀꢁꢂꢃ
ꢀꢁꢂꢃR ꢄꢁꢅꢅ
ꢄꢄ
ꢀ
ꢀ.ꢀꢁꢂ
ꢀꢁꢂꢃꢄ
ꢀ
ꢀꢁꢂꢃ ꢂꢄꢅ ꢆꢃꢇꢈ
ꢁꢂ ꢅꢉꢁꢃ ꢊꢁRꢊꢆꢁꢅꢋ
ꢊꢌꢍꢄꢆꢅ
ꢀ
ꢀRꢁꢂ
ꢀꢁꢂꢃ
ꢀꢁꢂꢃꢄ
ꢀ
ꢀꢁ
ꢀꢁ
ꢀ0
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ
ꢀꢁ0ꢂ
ꢀꢁꢂꢃꢄ ꢅꢆꢇꢄꢈꢉꢊ ꢋꢅꢌ
ꢀꢁꢂ ꢀꢁꢂꢃꢄꢅ
ꢁꢎꢄꢂ
ꢁꢃꢇꢅ
ꢀꢁꢂꢃ ꢄꢅ0ꢂꢆ
ꢀꢁꢂꢃ ꢄꢅ0ꢂꢆ
ꢀꢏꢄꢄꢈ
Rev. 0
1
Document Feedback
For more information www.analog.com