Datasheet > LTC1669CMS8#PBF

LTC1669CMS8#PBF

更新时间： 2024-02-10 18:52:53

品牌	Logo	应用领域
凌特 - Linear		光电二极管转换器
页数	文件大小	规格书
16页	157K
描述
LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Package: MSOP; Pins: 8; Temperature Range: 0°C to 70°C

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

LTC1669CMS8#PBF 技术参数

是否Rohs认证：	符合	生命周期：	Transferred
零件包装代码：	MSOP	包装说明：	TSSOP, TSSOP8,.19
针数：	8	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	2.84	最大模拟输出电压：	5.5 V
最小模拟输出电压：		转换器类型：	D/A CONVERTER
输入位码：	BINARY	输入格式：	SERIAL
JESD-30 代码：	S-PDSO-G8	JESD-609代码：	e3
长度：	3 mm	最大线性误差 (EL)：	0.2441%
湿度敏感等级：	1	位数：	10
功能数量：	1	端子数量：	8
最高工作温度：	70 °C	最低工作温度：
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSSOP
封装等效代码：	TSSOP8,.19	封装形状：	SQUARE
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	260
电源：	3/5 V	认证状态：	Not Qualified
座面最大高度：	1.1 mm	标称安定时间 (tstl)：	30 µs
子类别：	Other Converters	最大压摆率：	0.125 mA
标称供电电压：	3 V	表面贴装：	YES
技术：	CMOS	温度等级：	COMMERCIAL
端子面层：	Matte Tin (Sn)	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	宽度：	3 mm
Base Number Matches：	1

LTC1669CMS8#PBF 数据手册

LTC1669

APPLICATIONS INFORMATION

SYNC Address/Quick Command

Rail-to-Rail Output Considerations

As in any rail-to-rail device, the output is limited to volt-

ages within the supply range.

Inadditiontotheslaveaddress,theLTC1669hasanaddress

that can be shared by other devices so that they may be

updatedsynchronously. TheaddressiscalledtotheSYNC

address and uses the quick command protocol.

If the DAC offset is negative, the output for the lowest

codes limits at 0V as shown in Figure 1b.

The SYNC Address is 1111 110

Similarly, limiting can occur near full scale when V is

used as the reference. If V = V and the DAC full-scale

REF

Start 1111 110

SYNC Address

SY/CLR

Ack

Stop

1669 TA05

error (FSE) is positive, the output for the highest codes

limits at V as shown in Figure 1c. No full-scale limiting

can occur if the internal reference is used.

SY/CLR

Update output latches on rising edge of SCL during

Acknowledge of SYNC Address

Clear all internal latches on rising edge of SCL during

Acknowledge of SYNC Address

Offset and linearity are deﬁned and tested over the region

of the DAC transfer function where no output limiting can

occur.

The SY/CLR bit set high only has meaning when the “SY”

bit of the command byte was previously set HIGH. On

the otherhand, the SY/CLR bit set LOW will always clear

the part, independent of the state of the “SY” bit in the

command byte.

Internal Reference

In applications where a predictable output is required

that is independent of supply voltage, the LTC1669 has a

user-selectable internal reference. Selecting the internal

reference will set the full-scale output voltage to 2.5V. This

can be useful in applications where the supply voltage is

poorly regulated.

Voltage Output

The output ampliﬁer contained in the LTC1669 can source

or sink up to 5mA. The output stage swings to within a

few millivolts of either supply rail when unloaded and

has an equivalent output resistance of 85Ω when driving

a load to the rails. The output ampliﬁer is stable driving

capacitive loads up to 1000pF.

Using the LT^®1460 Micropower Series Reference as a

Power Supply for the LTC1669

In applications where the advantages of using the internal

reference are required but the full-scale range needs to

be greater than 2.5V, an external series reference can be

used. The LT1460 is ideal for use as a power supply for

the LTC1669 and can provide 3V, 3.3V and 5V full-scale

outputvoltageranges.TheLT1460providesaccuracy,noise

immunityandextendedsupplyrangetotheLTC1669when

A small resistor placed in series with the output can be

used to achieve stability for any load capacitance greater

than 1000pF. For example, a 0.1μF load can be driven

by the LTC1669 if a 110Ω series resistance is used. The

phase margin of the resulting circuit is 45° and increases

monotonicallyfromthispointiflargervaluesofresistance,

capacitance or both are substituted for the values given.

the LTC1669 is operated ratiometric to V . Since both

partsareavailableinSOT-23packages,thePCboardspace

for this application is extremely small. See Figure 2.

1669fa

1...8 9 101112 13 14...16

中文翻译

下载PDF

LTC1669CMS8#PBF 替代型号

型号	品牌	替代类型	描述	数据表
LTC1669CMS8#TRPBF	Linear	完全替代	LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Pa

与LTC1669CMS8#PBF相关器件

型号	品牌	获取价格	描述	数据表
LTC1669CMS8#TR	Linear	获取价格	暂无描述
LTC1669CMS8#TRPBF	Linear	获取价格	LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Pa
LTC1669CS5	Linear	获取价格	10-Bit Rail-to-Rail Micropower DAC with I2C Interface
LTC1669CS5#TRPBF	Linear	获取价格	LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Pa
LTC1669IMS8	Linear	获取价格	10-Bit Rail-to-Rail Micropower DAC with I2C Interface
LTC1669IMS8#PBF	Linear	获取价格	LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Pa
LTC1669IMS8#TR	Linear	获取价格	LTC1669 - 10-Bit Rail-to-Rail Micropower DAC with I<sup>2</sup>C Interface; Pa
LTC1676CN8	Linear	获取价格	Switching Regulator, Current-mode, 0.7A, 100kHz Switching Freq-Max, CMOS, PDIP8
LTC1676CN8#PBF	Linear	获取价格	Switching Regulator, Current-mode, 0.7A, 100kHz Switching Freq-Max, CMOS, PDIP8
LTC1676CS8#PBF	Linear	获取价格	Switching Regulator, Current-mode, 0.7A, 100kHz Switching Freq-Max, CMOS, PDSO8

与LTC1669CMS8#PBF相关文章

解读BAV99LT1数据手册：产品特性、电气参数及替换型号推荐
2024-06-18

1
资料解析：P82B96TD引脚图说明、电气参数
2024-06-18

1
ATA6621N数据手册解读：产品特性、引脚图信息、电气参数
2024-06-18

4
一文AO3400引脚图、参数、产品特性
2024-06-18

2

产品中心

服务支持

精选活动

关于我们

帮助中心

LTC1669CMS8#PBF

LTC1669CMS8#PBF 技术参数

LTC1669CMS8#PBF 数据手册

LTC1669CMS8#PBF 替代型号

与LTC1669CMS8#PBF相关器件

与LTC1669CMS8#PBF相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LTC1669CMS8#PBF

LTC1669CMS8#PBF 技术参数

LTC1669CMS8#PBF 数据手册

LTC1669CMS8#PBF 替代型号

与LTC1669CMS8#PBF相关器件

与LTC1669CMS8#PBF相关文章

您还可以找

您在本页遇到什么问题？