5秒后页面跳转
LMS78_09-1.0R PDF预览

LMS78_09-1.0R

更新时间: 2024-01-14 16:45:25
品牌 Logo 应用领域
GAPTEC /
页数 文件大小 规格书
4页 876K
描述
Wide Input Non-Isolated & Regulated, Single Positive/Negative Output

LMS78_09-1.0R 数据手册

 浏览型号LMS78_09-1.0R的Datasheet PDF文件第2页浏览型号LMS78_09-1.0R的Datasheet PDF文件第3页浏览型号LMS78_09-1.0R的Datasheet PDF文件第4页 
LMS78_1.0R Series  
Wide Input Non-Isolated & Regulated, Single Positive/Negative Output  
Switching Regulator  
Efficiency up to 96%  
Operating temperature:  
-40°C ~ +85°C  
Pin-out compatible with  
LM78xx linear regulator  
Short circuit protection (SCP)  
No-load input current as low  
as 0.1mA  
Low ripple and noise  
Subminiature SIP package  
Meeting UL60950, EN60950  
standards  
No heatsink required  
Industry standard pinout  
MTBF>2,000,000 hours  
Supporting negative output  
perfectly  
The LMS78_1.0R series are high efficiency switching regulators and ideal  
substitutes of LM78XX series three-terminal linear regulators.  
The product is featured with high efficiency, low loss, low radiation and  
no heat sink requirement. They are widely used in industrial control,  
instrumentation, and electric power applications.  
UL-60950-1 (E347551)  
Common specifications  
Short circuit protection:  
No-load power consumption:  
Reverse Polarity Input:  
Input Filter:  
Output specifications  
Continuous, automatic recovery  
0.1mA TYP, 1mA MAX  
Forbidden  
Item  
Test conditions  
Min  
Typ  
Max  
Units  
Output voltage  
accuracy  
100% load  
• LMS78_03-1.0R  
• others  
2
2
4
3
%
%
Capacitor Filter  
Line regulation  
Load regulation  
Ripple + Noise*  
Input Voltage Range  
10% to 100% load  
20MHz Bandwidth  
0.2  
0.4  
20  
0.4  
0.6  
75  
%
%
Temperature rise at full load:  
Cooling:  
25°C MAX, 15°C TYP  
Free air convection  
mVp-  
p
Operation temperature range:  
-40°C~+85°C  
Power derating above 71°C  
Switching frequency • 3.3V/5V output  
• others  
420  
580  
520  
680  
620  
780  
KHz  
KHz  
Storage temperature range:  
Pin welding resistance temperature:  
Operating case temperature:  
Storage humidity range:  
Package material:  
-55°C ~+125°C  
Transient response  
deviation  
Nominal input, 25%  
load step change  
50  
300  
mV  
260°C MAX, 1.5mm from case for 10 sec  
100°C  
Transient recovery  
time  
Nominal input, 25%  
load step change  
0.1  
1
ms  
< 95%RH  
Plastic [UL94-V0]  
Temperature  
coefficient  
-40 °C to +85 °C  
ambient  
0.03  
%/°C  
MTBF:  
>2,000,000 hours  
+25°C MIL-HDBK-217F  
* Test ripple and noise by “parallel cable” method. With the load lower than 10%,  
maximum ripple and noise will be 150mVp-p.  
Weight:  
3.8g  
Note:  
1. The max. capacitive load should be tested within the input voltage range and  
under full load conditions;  
Example:  
LMS78_05-1.0RL  
2. Without any special statement, all indexes are only specific to positive output  
application;  
LM = Series; S = SIP Case; 05 = 5Vout; 1.0 = 1.0A; R = Revised;  
L = Bended Pins  
3. Unless otherwise specified, data in this datasheet should be tested under the  
conditions of Ta = 25°C, humidity <75% when inputting nominal voltage and  
outputting rated load;  
4. All index testing methods in this datasheet are based on our Company’s  
corporate standards;  
5. The performance indexes of the product models listed in this manual are as  
above, but some indexes of non-standard model products will exceed the  
above-mentioned requirements, and please directly contact with our technician  
for specific information;  
6. Specifications subject to change without prior notice.  
EMC specifications  
EMI  
CE  
CISPR22/EN55022  
CISPR22/EN55022  
IEC/EN61000-4-2  
IEC/EN61000-4-3  
IEC/EN61000-4-4  
IEC/EN61000-4-5  
IEC/EN61000-4-6  
CLASS B  
CLASS B  
(External circuit refer to EMC recommended circuit, 2 )  
(External circuit refer to EMC recommended circuit, 2 )  
EMI  
RE  
EMS  
EMS  
EMS  
EMS  
EMS  
ESD  
RS  
Contact 4KV perf. Criteria B  
10V/m  
1KV  
perf. Criteria A  
EFT  
Surge  
CS  
perf. Criteria B (External circuit refer to EMC recommended circuit, 1 )  
perf. Criteria B (External circuit refer to EMC recommended circuit, 1 )  
perf. Criteria A  
1KV  
3 Vr.m.s  
Page 1 of 4  
LMS78_1.0R – Rev. 2020-1.2  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  

与LMS78_09-1.0R相关器件

型号 品牌 获取价格 描述 数据表
LMS78_09-2.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Output
LMS78_1.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Positive/Negative Output
LMS78_1.5-1.5 GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Output
LMS78_1.8-1.5 GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Output
LMS78_12-0.5R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Positive/Negative Output
LMS78_12-1.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Positive/Negative Output
LMS78_12-2.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Output
LMS78_15-0.5R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Positive/Negative Output
LMS78_15-1.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Positive/Negative Output
LMS78_15-2.0R GAPTEC

获取价格

Wide Input Non-Isolated & Regulated, Single Output