Datasheet > JDL-A46-D

JDL-A46-D

更新时间： 2022-04-06 18:24:15

品牌	Logo	应用领域
爱模 - MSYSTEM		/
页数	文件大小	规格书
4页	137K
描述
Plug-in Signal Conditioners M-UNIT

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

JDL-A46-D 数据手册

MODEL: JDL

• Specify the specification for option code /Q

Plug-in Signal Conditioners M-UNIT

(e.g. /C01/S01)

LINEARIZATION CODE

1: Segment data

2: Square root extraction

3: Thermocouple

4: RTD

DEFAULT

Linear

–––

CURRENT LOOP SUPPLY

(linearizing; field-programmable)

Functions & Features

• Powering a 4 – 20 mA DC current loop

• Microprocessor based

0 – 1000°C

Pt 100 0 – 100°C

• Shortcircuit protection

• Applicable to smart transmitters

• Field-programmable linearization data

• Isolation up to 2000 V AC

INPUT

Current

• Loop testing via hand-held programmer PU-2x

• Highdensity mounting

A: 4 – 20 mA DC (Input resistance 250 Ω)

[1] LINEARIZATION

0: None

Typical Applications

• Various 2-wire transmitters

1: Segment data

2: Square root extraction

3: Thermocouple

4: RTD

• Providing isolation and linearization for a 2-wire

temperature transmitter

• Linearizing weir flowmeter output to provide a linear-to-

volume signal

• Linearizer application

(4 – 20 mA input)

[2] OUTPUT

Current

• Square root extraction for differential pressure transmitter

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

(1.97)

(3.15)

127

(5)

mm (inch)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

MODEL: JDL–A[1][2]–[3][4]

ORDERING INFORMATION

• Code number: JDL-A[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. JDL-A1A-B/Q)

• Special output range (For codes Z & 0)

Default setting (following table) will be used if not otherwise

specified.

No linearization data will be programmed if you don't

specify type of linearization and required data.

• Linearization data

Code 1 segment data: Use Ordering Information Sheet (No.

ESU-1669) to specify linearization data.

Code 3 T/C, Code 4 RTD: Specify input sensor type and

temperature range.

JDL SPECIFICATIONS

ES-1668 Rev.12 Page 1/4

http://www.m-system.co.jp/

12 3 4

下载PDF

与JDL-A46-D相关器件

型号	品牌	描述	获取价格	数据表
JDL-A46-D/Q	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格
JDL-A46-F	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格
JDL-A46-F/Q	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格
JDL-A46-G	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格
JDL-A46-G/Q	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格
JDL-A46-H	MSYSTEM	Plug-in Signal Conditioners M-UNIT	获取价格