HSL Terminal Boards
HSL-TB32-MD
32-CH Separate I/O Terminal Base
Specifications
■ General Description
Separate I/O wiring connection for HSL I/O modules
■ I/O Wire Gauge
■ Power Supply
■ Dimensions
20 AWG. (max.); 28 AWG. (min.)
22 V to 26 VDC
129 x 107 x 47.5 mm (W x L x H)
Every I/O points uses 3-pin connector
Pin definition is signal/ground/power (from left to right)
Separate fuse protection for each I/O points
(jumper selection)
Supports common/separate DC power supply
(jumper selection)
Terminator resistor on board (jumper selection)
Interlocking design for rugged installation
Power LED indicator
Support Modules
•ꢀHSL-DI16DO16-M-NN
•ꢀHSL-DI32-M-N
•ꢀHSL-DO32-M-N
DIN rail mounting
Power and ground included for each signal channel
HSL-TB32-M-DIN
32-CH I/O Terminal Base
Specifications
Support Modules
•ꢀHSL-DI16DO16-M-NN
•ꢀHSL-DI32-M-N
■ General Description
Field I/O wiring connection for HSL I/O modules
Spring terminal for easy field wiring
Power and ground included for each signal channel
Interlocking design for rugged installation
Power LED indicator
•ꢀHSL-DO32-M-N
•ꢀHSL-R8DI16-M-N
•ꢀHSL-AI16AO2-M-VV/-AV
DIN rail mounting
Terminator resistor on board
20 AWG. (max.); 28 AWG. (min.)
22 V to 26 VDC
■ I/O Wire Gauge
■ Power supply
■ Dimensions
128.5 x 85.5 x 108 mm (W x L x H)
HSL-TB32-U-DIN
32 Points Universal Terminal Base
Specifications
Support Modules
•ꢀHSL-DI16DO16-DB-NN
•ꢀHSL-DI32-DB-N
■ General Description
Field I/O wiring connection for HSL I/O modules
Spring terminal for easy field wiring
Power and ground included for each signal channel
Interlocking design for rugged installation
Power LED indicator
•ꢀHSL-DO32-DB-N
DIN rail mounting
Terminator resistor on board
20 AWG. (max.); 28 AWG. (min.)
22 V to 26 VDC
■ I/O Wire Gauge
■ Power Supply
■ Dimensions
126 x 120.1 x 107.3 mm (W x L x H)
HSL-TB64
64 Points High Density Terminal Base
Specifications
Support Modules
•ꢀHSL-DI16DO16-DB-NN
•ꢀHSL-DI32-DB-N
■ General Description
Field I/O wiring connection for HSL I/O modules
Spring terminal for easy field wiring
Power and ground included for each signal channel
Interlocking design for rugged installation
Power LED indicator
•ꢀHSL-DO32-DB-N
DIN rail mounting
Terminator resistor on board
20 AWG. (max.); 28 AWG. (min.)
22 V to 26 VDC
■ I/O Wire Gauge
■ Power Supply
■ Dimensions
168.7 x 120.1 x 107.1 mm (W x L x H)
7-14
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.
www.adlinktech.com