ꢀHIF6 Series: Connection Type Coupled Connector
HIF3B Series (MIL-C-83503)
ꢀCompliant with the MIL standard
ꢀThe VA idea is reflected on both pin header and socket.
ꢀProducts with pull-out tab are available.
ꢀCountermeasures are taken against noises in combination with the applicable cover case.
ꢀThe type aligned in single-row, low profile type, is available for pin header locking
system, in addition to standard products.
Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64
HIF2 Series (Board direct mount type)
12-row parallel type (HIF2E)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
2.54mm grid alignment facilitates to the design pattern.
24-row staggered type (HIF2C)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
Mounting height is 4.9mm low profile type.
1
2
HIF5 Series (Card edge ribbon type)
ꢀThree types of full hole, semi-hole and no mount area are provided for the unit mount area.
ꢀConnectors are connected in the bus line system.
ꢀCables can be returned within the connector mold width.
Number of contacts: 20, 26, 34, 40, 50, 60
RC Series (Micro ribbon connector)
ꢀSince the cable insulation displacement area is standard pitch 1.27mm, the standard
ribbon cable can be easily utilized.
ꢀCountermeasures are taken against noises in combination with the cover case.
ꢀCover case is light weight and compact.
ꢀStraight and right angle types are installed on the dip side.
Number of contacts: 14, 24, 36, 50
FD Series (D sub-ribbon connector)
ꢀThe standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a
jig, in addition to the same pitch 1.38mm as for the D sub connector.
ꢀThe space saving type allows to reduce the thickness on the connection side according
to set miniaturization.
ꢀConnectors can be installed from both front and rear sides of the chassis or panel.
Number of contacts: 9, 15, 25, 37
A133