5秒后页面跳转
HI-1574PCMF PDF预览

HI-1574PCMF

更新时间: 2024-02-13 13:36:18
品牌 Logo 应用领域
HOLTIC /
页数 文件大小 规格书
9页 164K
描述
3.3V Monolithic Dual Transceivers

HI-1574PCMF 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:HSOP,针数:20
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.29
JESD-30 代码:R-PDSO-G20JESD-609代码:e3
长度:12.79 mm湿度敏感等级:1
功能数量:1端子数量:20
最高工作温度:125 °C最低工作温度:-55 °C
封装主体材料:PLASTIC/EPOXY封装代码:HSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, HEAT SINK/SLUG
峰值回流温度(摄氏度):250认证状态:Not Qualified
座面最大高度:2.82 mm标称供电电压:3.3 V
表面贴装:YES技术:CMOS
电信集成电路类型:MIL-STD-1553 DATA BUS TRANSCEIVER温度等级:MILITARY
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:7.493 mm
Base Number Matches:1

HI-1574PCMF 数据手册

 浏览型号HI-1574PCMF的Datasheet PDF文件第1页浏览型号HI-1574PCMF的Datasheet PDF文件第3页浏览型号HI-1574PCMF的Datasheet PDF文件第4页浏览型号HI-1574PCMF的Datasheet PDF文件第5页浏览型号HI-1574PCMF的Datasheet PDF文件第6页浏览型号HI-1574PCMF的Datasheet PDF文件第7页 
HI-1573, HI-1574  
PIN DESCRIPTIONS  
PIN  
(DIP & SOIC)  
SYMBOL FUNCTION  
DESCRIPTION  
1
2
VDDA  
BUSA  
BUSA  
RXENA  
GNDA  
VDDB  
BUSB  
BUSB  
RXENB  
GNDB  
RXB  
power supply  
analog output  
analog output  
digital input  
power supply  
power supply  
analog output  
analog output  
digital input  
power supply  
digital output  
digital output  
digital input  
digital input  
digital input  
digital output  
digital output  
digital input  
digital input  
digital input  
+3.3 volt power for transceiver A  
MIL-STD-1533 bus driver A, positive signal  
MIL-STD-1553 bus driver A, negative signal  
Receiver A enable. If low, forces RXA and RXA low (HI-1573) or High (HI-1574)  
Ground for transceiver A  
3
4
5
6
+3.3 volt power for transceiver B  
7
MIL-STD-1533 bus driver B, positive signal  
MIL-STD-1553 bus driver B, negative signal  
Receiver B enable. If low, forces RXB and RXB low (HI-1573) or High (HI-1574)  
Ground for transceiver B  
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Receiver B output, inverted  
RXB  
Receiver B output, non-inverted  
TXINHB  
TXB  
Transmit inhibit, bus B. If high BUSB, BUSB disabled  
Transmitter B digital data input, non-inverted  
Transmitter B digital data input, inverted  
Receiver A output, inverted  
TXB  
RXA  
RXA  
Receiver A output, non-inverted  
TXINHA  
TXA  
Transmit inhibit, bus A. If high BUSA, BUSA disabled  
Transmitter A digital data input, non-inverted  
Transmitter A digital data input, inverted  
TXA  
FUNCTIONAL DESCRIPTION  
RECEIVER  
The HI-1573 family of data bus transceivers contains dif-  
ferential voltage source drivers and differential receivers.  
They are intended for applications using a MIL-STD-1553  
A/B data bus. The device produces a trapezoidal output  
waveform during transmission.  
The receiver accepts bi-phase differential data from the  
MIL-STD-1553 bus through the same direct or transformer  
coupled interface as the transmitter. The receiver’s differ-  
ential input stage drives a filter and threshold comparator  
that produces CMOS data at the RXA/B and RXA/B output  
pins.  
TRANSMITTER  
Data input to the device’s transmitter section is from the  
complementary CMOS inputs TXA/B and TXA/B. The  
transmitter accepts Manchester II bi-phase data and con-  
verts it to differential voltages on BUSA/B and BUSA/B.  
The transceiver outputs are either direct or transformer  
coupled to the MIL-STD-1553 data bus. Both coupling  
methods produce a nominal voltage on the bus of 7.5 volts  
peak to peak.  
Each set of receiver outputs can be independently forced  
to a logic "0" (HI-1573) or logic “1” (HI-1574) by setting  
RXENAor RXENB low.  
MIL-STD-1553 BUS INTERFACE  
A direct coupled interface (see Figure 2) uses a 1:2.5 ratio  
isolation transformer and two 55 ohm isolation resistors  
between the transformer and the bus.  
The transmitter is automatically inhibited and placed in the  
high impedance state when both TXA/B and TXA/B are ei-  
ther at a logic “1” or logic “0” simultaneously. A logic “1” ap-  
plied to the TXINHA/B input will force the transmitter to the  
high impedance state, regardless of the state of TXA/B and  
TXA/B.  
In a transformer coupled interface (see Figure 3), the  
transceiver is connected to a 1:1.79 isolation transformer  
which in turn is connected to a 1:1.4 coupling transformer.  
The transformer coupled method also requires two  
coupling resistors equal to 75% of the bus characteristic  
impedence (Zo) between the coupling transformer and the  
bus.  
HOLT INTEGRATED CIRCUITS  
2

与HI-1574PCMF相关器件

型号 品牌 描述 获取价格 数据表
HI-1574PCT HOLTIC 3.3V Monolithic Dual Transceivers

获取价格

HI-1574PCTF HOLTIC 3.3V Monolithic Dual Transceivers

获取价格

HI-1574PSI HOLTIC 3.3V Monolithic Dual Transceivers

获取价格

HI-1574PSIF HOLTIC 3.3V Monolithic Dual Transceivers

获取价格

HI-1574PSM HOLTIC 3.3V Monolithic Dual Transceivers

获取价格

HI-1574PSMF HOLTIC 3.3V Monolithic Dual Transceivers

获取价格