Mechanical Dimensions[6]
70.4
(2.77)
MAX.
70.4
MAX.
(2.77)
FERRULE
2.50
(0.098)
DIA.
FERRULE
BOOT
3.15
(0.124)
DIA.
BOOT
7.9
(0.31)
COUPLING NUT MAY BE
KNURLED OR HEXAGONAL
BAYONET STYLE
COUPLING NUT
1/4 – 36 UNS – 2B
INTERNAL THREAD
Figure 3. HFBR-4003 and HFBR-4004 ST Style Connector.
Figure 2. HFBR-4001 and HFBR-4002 SMA Style Connector.
3.3
(0.13)
3/8 – 24 UNF – 2B
1.5
(0.06)
1/4 – 36 UNS – 2B
1/4 – 36 UNS – 2A
12.7
(0.50)
BAYONET LOCK PINS
7.9
(5/16)
3/8 – 36 UNF – 2A
NUT
QUANTITY: 1 EA
NUT
QUANTITY: 2 EA
6.9
(0.27)
DIA.
11.1
(0.44)
1.0
(0.04)
1.0
(0.04)
9.5
(0.38)
9.5
(0.38)
19.6
(0.77)
10.1
(0.40)
14.5
29.3
(0.60)
(1.12)
INTERNAL TOOTH LOCKWASHER
QUANTITY: 2 EA
INTERNAL TOOTH LOCKWASHER
QUANTITY: 1 EA
Figure 4. HFBR-4409 SMA Style Mating Adapter.
Figure 5. HFBR-4419 ST Style Mating Adapter.
Notes:
4. Recommended connectoring kit:
OFTI 400 Series Field Installation Kit.
1. HP is in the process of obsoleting the
following part numbers and does not
recommend their use for new
designs: HFBR-AHDxxx and HFBR-
AHSxxx cable assemblies, the
HFBR-4000 connector, the HFBR-
3099 mating adapter, and HFBR-
0100/0101/0102 connectoring kits.
Please contact your local HP
components representative for more
information.
5. Fixed losses (length independent)
apply only to the use of mating
adapters in link design calculations.
Fixed losses at transmitter/receiver
interfaces are included in HP
transmitter/receiver optical
specifications.
6. Dimensions in millimetres (inches).
2. Short term is ≤ 6 hours.
3. Calculations are based on worst case
parameters of HP 820 nm and 1300
nm optical components.
263