The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX2 Series●1.27mm Pitch Multi-function Two Piece Connector
3. Board to board type
4. Board to cable type
q Flux swell prevention
q Complete lock with easy operation
The straight through hole type takes the complete flux
tight action from the board back side at solder dipping.
The type is prepared, corresponding to whether or not
cleaning is required.
Employing the inner lock system, complete lock and eject
actions can be performed with easy operation.
w Applicable cable
The applicable cable is the <UL2651>AWG#28 flat cable
(7/0.127mm), and the jacket size is 0.9 0.1mm.
w Stack height 12mm to 16mm
The board stack height can be set to every 1 mm unit up
to 12 to 16mm.
5. SMT type
Strength security with metaltab
e Mis-insertion preventive mechanism
The right angle type is equipped with metaltab to secure
soldering strength, and constructed so as to fix by
screws. The straight type can choose whether or not
metaltab are required.
The mating area is designed in a mechanism so as to
prevent mis-insertion, and complete countermeasures
have been taken against wrenching.
■Applications
Computers, peripheral equipments, various machines etc.
■Product Specifications
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Rating
Voltage rating 125V AC Operating Humidity Range 40 to 80%
Storage Humidity Range 40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
250V DC
2. Withstanding Voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance
4. Vibration
45m ohms max.
100mA
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
Contact resistance: 55m ohms max.
(-55ç: 30 minutes→15 to 35ç: 2 to 3 minutes →
6. Temperature Cycle
Insulation resistance: 100M ohms min.
(-85ç: 30 minutes→15 to 35ç: 2 to 3 minutes) 5 cycles
No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 55 m ohms max.
500 cycles
Reflow: At the recommended temperature profile
SMT Type
Manual soldering: 360ç for 5 seconds
8. Resistance to soldering heat No deformation of components affecting performance.
Solder bath: 260ç for 10 seconds
DIP Type
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
■Material
Parts
Material
Polyamid
PBT/Polyamid
PPS
Finish
Black
Remark
Insulator
Dip type
Socket
SMT type
Receptacle
Socket
UL94V-0
Light brown
Contact
Phosphor bronze
________
Selective gold plated
Header
Phosphor bronze or brass
■Stacking Variation
Unit:mm
SMT type
Dip type
Receptacle
FX2C-*S-1.27DSA(L)
FX2C2-*S-1.27DSA(L) FX2-*S-1.27SV(L)
Header
FX2CA-*S-1.27DSA(L) FX2CA2-*S-1.27DSA(L)
FX2C-*P-1.27DSA(L)
12.0
14.0
12.2
FX2CA-*P-1.27DSA(L)
FX2CA1-*P-1.27DSA(L)
FX2CA2-*P-1.27DSA(L)
FX2-*P-1.27SV(L)
Dip type
13.0
14.0
12.1
15.0
16.0
14.1
13.2
14.2
12.3
SMT type
A86