Datasheet > FNFM-TTL-200F

FNFM-TTL-200F

更新时间： 2024-02-08 04:40:03

品牌	Logo	应用领域
其他 - ETC		延迟线逻辑集成电路输出元件
页数	文件大小	规格书
2页	155K
描述
Analog Filter

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

FNFM-TTL-200F 数据手册

pulse width recognition is maintained as shown in the accompanying

part number table, when tested under the "Test Conditions" shown.

Temperature coefficient is less than ±800ppm/⁰C over the operating

temperature range of 0 to +70⁰C.

T L FAST input and output

•

Pulse width detection stable and precise

14-pin DIP package

Leads — thru-hole, J, Gull Wing or Tucked

Available in pulse widths from 5 to 200ns

These noise filter modules are of hybrid construction utilizing the

proven technologies of active integrated circuitry and of passive

networks utilizing capacitive, inductive and resistive elements. The

MTBF on these modules, when calculated per MIL-HDBK-217 for a

50⁰C ground fixed environment, is in excess of 3.5 million hours.

8 T L fan-out capacity

design notes

These “DIP Series” modules are packaged in a 14-pin DIP

housing, molded of flame-proof Diallyl Phthalate per MIL-M-14,

Type SDG-F, and are fully encapsulated in epoxy resin. Leads meet

the solderability requirements of MIL-STD-202, Method 208. Corner

standoffs on the housing of the thru-hole lead version and lead

design of the surface mount versions provide positive standoff from

the printed circuit board to permit solder-fillet formation and flush

cleaning of solder-flux residues for improved reliability.

The "DIP Series" Logic Noise Filter Modules developed by

Engineered Components Company has been designed for use in

T L systems employing data pulses of either a fixed width or a

minimum width. The filter module will produce a “1” at the output,

without significant change in width, only when a “1” appears at the

input for greater than the specified pulse width; all shorter pulses

will be suppressed. This operation will effectively eliminate sources

of stray noise pulses and should prove particularly effective in

eliminating transients created by crosstalk from leading edges of

fast rise time pulses.

Marking consists of the manufacturer's name, logo (EC ), part

number, terminal identification and date code of manufacture. All

marking is applied by silk screen process using white epoxy paint in

accordance with MIL-STD-130, to meet the permanency of identifi-

cation required by MIL-STD-202, Method 215.

The FNFM-TTL is offered in 20 pulse widths from 5ns to 200ns

for optimum noise pulse rejection in varous systems. Tolerance on

中文翻译

下载PDF

与FNFM-TTL-200F相关器件

型号	品牌	获取价格	描述	数据表
FNFM-TTL-200G	ETC	获取价格	Analog Filter
FNFM-TTL-200J	ETC	获取价格	Analog Filter
FNFM-TTL-200T	ETC	获取价格	Analog Filter
FNFM-TTL-20F	ETC	获取价格	Analog Filter
FNFM-TTL-20G	ETC	获取价格	Analog Filter
FNFM-TTL-20J	ETC	获取价格	Analog Filter
FNFM-TTL-20T	ETC	获取价格	Analog Filter
FNFM-TTL-25F	ETC	获取价格	Analog Filter
FNFM-TTL-25G	ETC	获取价格	Analog Filter
FNFM-TTL-25J	ETC	获取价格	Analog Filter