April 2007
FAN7530
Critical Conduction Mode PFC Controller
Features
Description
Low Total Harmonic Distortion (THD)
Precise Adjustable Output Over-Voltage Protection
Open-Feedback Protection and Disable Function
Zero Current Detector
The FAN7530 is an active power factor correction (PFC)
controller for the boost PFC applications that operates in
critical conduction mode (CRM). It uses the voltage
mode PWM that compares an internal ramp signal with
the error amplifier output to generate MOSFET turn-off
signal. Because the voltage mode CRM PFC controller
does not need the rectified AC line voltage information, it
can save the power loss of the input voltage sensing net-
work necessary for the current mode CRM PFC control-
ler.
150µs Internal Start-up Timer
MOSFET Over-Current Protection
Under-Voltage Lockout with 3.5V Hysteresis
Low Start-up (40µA) and Operating Current (1.5mA)
Totem Pole Output with High State Clamp
+500/-800mA Peak Gate Drive Current
8-pin DIP or 8-pin SOP
FAN7530 provides many protection functions such as
over voltage protection, open-feedback protection, over-
current protection, and under-voltage lockout protection.
The FAN7530 can be disabled if the INV pin voltage is
lower than 0.45V and the operating current decreases to
65µA. Using a new variable on-time control method,
THD is lower than the conventional CRM boost PFC ICs.
Applications
Adapter
Ballast
LCD TV, CRT TV
SMPS
Related Application Notes
AN-6027 - Design of Power Factor Correction Circuit
Using FAN7530
Ordering Information
OperatingTemp.
Marking
Part Number
FAN7530N
Range
Pb-Free
Yes
Package
8-DIP
Packing Method
Code
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
Rail
Rail
FAN7530
FAN7530
FAN7530
FAN7530M
Yes
8-SOP
8-SOP
FAN7530MX
Yes
Tape & Reel
© 2006 Fairchild Semiconductor Corporation
FAN7530 Rev. 1.0.2
www.fairchildsemi.com