Dual Path RF Switch with LNA and
DVGA 2.3GHz to 2.7GHz
F0452B
Datasheet
Description
Features
The F0452B is an integrated dual-path RF front-end consisting of
an RF switch and two gain stages with 6dB gain control used in the
analog front-end receiver of an Active Antenna System (AAS). The
F0452B supports frequencies from 2.3GHz to 2.7GHz.
.
Gain at 2.6GHz
34dB typical in High Gain Mode
28dB typical in Low Gain Mode
1.5dB NF at 2.6GHz
+23dBm OIP3 at 2.6GHz
OP1dB at 2.6GHz
.
.
.
The F0452B provides 34dB gain with +23dBm OIP3, +15dBm
output P1dB, and 1.5dB noise figure (NF) at 2.6GHz. Gain is
reduced 6dB in a single step with a maximum settling time of 31ns.
The device uses a single 3.3V supply and 130mA of IDD.
+15dBm in High Gain Mode
+14dBm in Low Gain Mode
The F0452B is offered in a 5 5 0.8 mm, 32-LGA package with
50Ω input and output amplifier impedances for ease of integration
into the signal path.
.
.
.
.
.
.
50Ω single-ended input / output amplifier impedances
IDD = 130mA
Independent Standby Mode for power savings
Supply voltage: +3.15V to +3.45V
5 5 mm, 32-LGA package
-40°C to +105°C exposed pad operating temperature range
Competitive Advantage
.
.
.
.
High integration
Low noise and high linearity
On-chip matching and bias
Extremely low current consumption
Block Diagram
Typical Applications
.
.
.
Multi-mode, multi-carrier receivers
4.5G (LTE Advanced)
5G band 42
SW1_IN
STBY1
ATT1_CTRL
SW1_CTRL
SW2_CTRL
ATT2_CTRL
STBY2
SW2_IN
© 2019 Integrated Device Technology, Inc.
1
May 7, 2019