ELJNCR82KF

更新时间： 2024-01-14 04:48:53

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

ELJNCR82KF 技术参数

Chip Inductors

Cautions for use

For securing upgraded reliability and safety, consider following caution items.

1. Land pattern design

Refer to the recommended land dimensions of each type at flow and reflow solderings.

Avoid placing the chip inductor on any metal pattern except the land because the drop of Q and mutual

conductance may occur.

Provisions for venting of flux gases should be made for high density assemblies.

2. Mounting

Placement force should not exceed 20N because electric and magnetic characteristics change by applying

strong force.

3. Soldering

a Flow soldering

Recommended conditions; 260 ¡C max., 5sec. max.(total time at 2 waves method)

b Reflow soldering

1 Infra-red reflow soldering

Recommended conditions: 200 ¡C or high at electrode, 60sec. max. and peak 250 ¡C max., 5sec. max.

If the solder at the two electrodes are not melt simultaneously, the chip inductor may not be mounted

on the right place.

It is recommended to fix by adhesive when the deviation is great.

2 VPS reflow soldering

Recommended conditions: 215±5 ¡C, 20 to 60sec.

4. Cleaning

1 Do not use acid or alkari agents. Some cleaning solvents out of CFC may damage the products.

Confirm the reliability in advance.

2 If ultrasonic cleaning is employed, please inform us immediately for technical consultation.

5. Instructions for applying current

The rated current is defined as the smaller value of either the current value when the inductance drops

10 % down from the initial point, or the current value when the average temperature of coil inside rises

20 K up from initial point.

Do not operate this coils beyond the specified rated current.

6. Storage

1 Be careful a high temperature, a large amount of moisture, gases and magnetic field.

2 At long storage of more than 1 year, use the products after inspecting the outer structure

1...12 13 1415

下载PDF

型号	品牌	描述	获取价格	数据表
ELJND102DF	PANASONIC	Chip inductors	获取价格
ELJND102DFB	PANASONIC	1. High Frequency Use (Non Magnetic Core) RF, ND, NC, NA	获取价格
ELJND102JF	PANASONIC	Chip inductors	获取价格
ELJND102JFB	PANASONIC	1. High Frequency Use (Non Magnetic Core) RF, ND, NC, NA	获取价格
ELJND102KF	PANASONIC	Chip inductors	获取价格
ELJND102KFB	PANASONIC	1. High Frequency Use (Non Magnetic Core) RF, ND, NC, NA	获取价格