CUSTOM NETWORKS
RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
Term. W is
RoHS
compliant &
260°C process
compatible
DSN SERIES - SIP Networks
DDN SERIES - DIP Networks
DLN SERIES - SM Networks
.
RCD DSN10
RoHS
Custom R/L/C/D networks with little or no tooling charge!
ꢀ Industry’s widest range of custom networks!
ꢀ Available on exclusive SWIFT delivery program
ꢀ Very economical in any volume
ꢀ SIP package sizes: 3 to 12-pin std., (2 to 40-pin avail.)
ꢀ DIP package sizes: 14 & 16-pin std., (4 to 40-pin avail.)
ꢀ Resistor matching to .005% 1PPM TC
ꢀ Wide range of custom and low-profile sizes available.
Custom circuits are designed to the specific application
utilizing virtually any combination of R/L/C/D components.
RCD’s custom networks are a cost effective approach for numerous
applications. Networks can be comprised solely of resistors, capacitors,
inductors, diodes, or any combination. Depending on the requirements,
custom networks are produced via monolithic (single substrate) or
discrete construction. Discrete networks utilize various chip or leaded
components welded or soldered into a circuit, then encapsulated into a
molded epoxy case. Discrete networks provide wide design flexibility,
fast delivery, and low set-up costs. Monolithic networks are conformal
coated and generally enable lowest cost in medium to higher volumes.
SERIES DSN SIP DIMENSIONS
SERIES DDN DIP
SERIES DLN SURFACE MOUNT
Odd pin counts also available
16 pin= .87[22]
14 pin=.77[19.5]
16 pin= .87[22]
14pin=.77[19.5]
1.2 [30.5] ←12 Pin
1.0 [25.4] ←10 Pin
→
→
← 8 Pin
→
.80 [20.3]
← 6 Pin →
.60 [15.2]
.40 [10.2]
.31 [7.9]
4 Pin
3 Pin
.100 [2.54]
→ ←
.100 [2.54]
→ ←
→
←.125 [3.2]
.475[12]max,
.397[10]avail
↓
.35
[8.9]
.475[12]max,
.397[10]avail
(.095 [2.4] avail.)
.307
[7.8]
Max.
.277 [7]
Max.
↓
.125 [3.2]
Min.
.025 [.64] Max.
→ ←
Dimensions, typ Inch [mm]
.125 [3.2] Min.
.300
↑
.620 [15.7]
.100 [2.54]
←
→
←
→
→ ←
↑
[7.62]
DSN STANDARD CONFIGURATIONS
DDN & DLN STANDARD CONFIGURATIONS
Config. A
Config. B
Config. C
Config.#1 (3-12 pin)
Config.2 (4,6,8,10,12pin)
Config. #6 (3-12 pin)
vvv
vvv
vvv
vvv vvv
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
R
R
R
R
R
R
2R
2R 2R 2R 2R 2R 2R 2R
1
1
Config.#7 (6 -12 pin)
Config. D
Config. E
Config.8 (3pin)
vvv vvv
R1 R2
Config.9 (4pin)
R
R
R
vvv
vvv
vvv
vvv vvv
R1 R1 R1 R1 R1 R1
R1
R2
>
>
>
>
>
>
>
>
>
2R 2R 2R > 2R >2R
>
>
>
>
R2 R2 R2 R2 R2 R2
1
Standard configurations have single resistance value per package exept Config’s 7, 8, & 9.
TYPICAL CUSTOM CONFIGURATIONS: (part numbers are assigned by factory)
- - - - --
-
R1
R2
R3
R4
R1 R2 R3 R4
RN
R1 R2
C1 R3
SPECIFICATIONS:
P/N DESIGNATION: (consult factory for non-std circuits)
DSN 08
2
- 1002 - F F
W
Resistors (thick-film, thin-film, wirewound,
foil, composition): 0.005Ω to 4000Meg,
±0.005% to 5%, ±2 to 200ppm, .125W is
standard (available up to 1W)
Capacitors (ceramic or tantalum):
NPO: 0.47pf - 0.1pf, ±0.5% to ±10%
X7R: 100pf - 2.2µf, ±2% to ±20%
X5R: 100pf - 10µf, ±2% to ±20%
Z5U/Y5V: 1000pf-10µf, ±10% to +80-20%
Tantalum: 0.1uF- 220uF, ±1% to ±20%
DSN, DDN, or DLN
Number of Pins (02 to 40)
Configuration
Option (leave blank if standard)
Res.Code .01%-1%: 3 sig. figures & multiplier (10R0=10Ω, 1001=1KΩ)
2%-5%: 2 sig. figures & multiplier (1R0=1Ω, 102=1K, 105=1M). When comprised of 2
values, separate with /, e.g. 181/391=180Ω/390Ω
Tolerance: T=.01%,Q=.02%,A=.05%,B=.1%,C=.25%,D=.5%,F=1%,G=2%,J=5%
Ratio Tolerance: V=0.005%, Y=0.01%, Q=0.02%, A=0.05%, Z=0.1%, C=0.25%, D=0.5%,
F=1%, G=2% (leave blank if not required)
Diodes: fast speed diodes such as
1N3595, 1N4148,1N4150,etc., Schottky,
Germanium,etc.
TC (leave blank for 200ppm std): 101=100ppm, 125=100ppm abs/25ppm track, 50=50ppm,
525=50ppm abs/25ppm track, 510=50ppm ab/10ppm track, 25=25ppm, 210=25ppm ab/10ppm track,
205=25ppm ab/5ppm track, 10=10ppm, 105=10ppm ab/5ppm track, 102=10ppm ab/2ppm track, 5=5ppm,
55=5ppm abs/5ppm track, 53=5ppm ab/3ppm track, 52=5ppm ab/2ppm track, 51=5ppm ab/1ppm track
Inductors (thick-film, thin-film, wirewound):
1nHto 1000uH, ±10% (±1% to ±20% avail)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA050F Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
36
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
