Multilayer Organic (MLO®) Diplexers
0805 WLAN
MLO® TECHNOLOGY
The 0805 diplexer is a best in class low profile multilayer organic passive device that is based on KYOCERA AVX patented
multilayer organic high density interconnect technology. The MLO® diplexer uses high dielectric constant and low loss
materials to realize high Q passive printed elements such as inductors and capacitors in a multilayer stack up. The MLO®
diplexers can support multiple wireless standards such as WCDMA, CDMA, WLAN and GSM. These components which
are less than 0.6mm in thickness are ideally suited for band switching for dual band systems. All diplexers are expansion
matched to FR4 thereby resulting in improved reliability over standard Si and ceramic devices.
APPLICATIONS
Multiband applications including WiFi, WiMax, GPS, and cellular bands
LAND GRID ARRAY ADVANTAGES
• Low Insertion Loss
• Excellent Solderability
• Low Parasitics
• Low Profile
HOW TO ORDER
COMPONENT DIMENSIONS AND FUNCTIONS
DP 05
A
5250
7
TR
Bottom View
Side View
0.6ꢁ 0.05
(0.025 0.0024
0.20 0.ꢀ0
(0.008 0.00ꢁ4
Type Size Design Frequency
(MHz)
Finish
Packaging
7 = Au
Tape & Reel
0.0ꢁ 0.0ꢁ
ꢀ.28 0.20
(0.050 0.0084
(0.002 0.0024
T = NiSn TR = 3 Kpcs
TR/500 = 500 pcs
0.25 0.ꢀ0
(0.0ꢀ0 0.00ꢁ4
0.95 0.05
(0.037 0.0024
QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and visual
characteristics.
0.55 0.ꢀ0
(0.022 0.00ꢁ4
0.20 0.ꢀ0
(0.008 0.00ꢁ4
0.ꢁꢁ 0.ꢀ0
(0.0ꢀ7 0.00ꢁ4
2.ꢀ2 0.20
(0.083 0.0084
OPERATING TEMPERATURE
Unit: mm (inches)
-40ºC to +85ºC
TERMINATION
Terminal No.
Terminal Name
High Frequency Port
Finishes available in Ni/Sn, Immersion Sn, Immersion Au and OSP
coatings which are compatible with automatic soldering technologies
which include reflow, wave soldering, vapor phase and manual.
1
2
3
4
5
6
GND
Low Frequency Port
GND
ORIENTATION IN TAPE
Top View
Common Port
GND
PART NUMBER: DP05A52507TR
Specification @ 25ºC
Size [mm(inches)]
Height [mm(inches)]
6
5
4
1
2
3
6
5
4
1
2
3
2.12 x 1.28 (0.083 x 0.050)
0.55 (0.021)
1.5
2450±50
5250±100
-0.5
Volume (mm^3)
Frequency Range (F1) (MHz)
Frequency Range (F2) (MHz)
Insertion Loss (F1) (dB)
Insertion Loss (F2) (dB)
-0.5
-20
-20
-12
-12
-25
-21
Note part will be packaged with dot near hole in tape. Location of dot may vary.
Attenuation (F1) at (F2) (dB)
Attenuation (F2) at (F1) (dB)
Return Loss (Lowband @ F1) (dB)
Return Loss (Highband @ F2) (dB)
Isolation (Lowband @ F1) (dB)
Isolation (Highband @ F2) (dB)
POWER CAPACITY
4.5W Maximum
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
414
011321
rf microwave products
–
–