DM9621
USB2.0 to Fast Ethernet Controller
1. Features:
z
USB Interface
USB2.0 Device
Supports 12Mbps Full-Speed operation
Supports 480Mbps High-Speed operation
Supports suspend mode and remote wake-up Resume
Supports USB standard commands
Supports vendor specific commands
Efficient TX/RX FIFO auto management.
Supports 4 endpoints (Control, Interrupt, Bulk_IN, Bulk_OUT)
Supported Classes: USB Common Class / USB Communications Class –
z
Ethernet
Support IEEE802.3u 100BASE-TX and with IEEE802.3 10BASE-T standards
Support IEEE802.3x flow control function for 100BASE-TX and 10BASET.
Built-in 10/100Mbps Fast-Ethernet PHY with Auto-MDIX
Supports RMII interface or 8 pins GPIO
Support Auto-negotiation function
Back Pressure Mode for half-duplex mode flow Control
PAUSE frame for full-duplex flow control
Supports GPIO, wakeup frame, link status change and Magic packet events for
remote wake-up
Support TCP / UDP / IP checksum offload checking and generating
z
z
z
EEPROM Interface
Supports 128/256/512 bytes (93C46/93C56/93C66) of serial EEPROM(for
storing USB Descriptors)
93C46/93C56/93C66 auto-detection
LED Indications
Ethernet – Link / Act indication
Ethernet – Speed (10M / 100M) indication
USB speed indication (full / high speed + traffic modes)
Clock
Single 25MHz / 30 ppm crystal or oscillator
Optional 12MHz crystal for USB
Preliminary
6
Version: DM9621 -14-DS-P02
February 23, 2011