Datasheet > DF7-12DP-3.96DSA

DF7-12DP-3.96DSA

更新时间： 2022-02-26 09:34:16

品牌	Logo	应用领域
广濑 - HRS		/
页数	文件大小	规格书
15页	542K
描述
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÃV Listed)

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DF7-12DP-3.96DSA 数据手册

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)

DF7 Series

Complete

Locking

Function

Completely

enclosed

locking system

Full barrier

between adjacent

contacts.

Prevention of

Incorrect Connections

ꢀFeatures

1. Complete Locking Function

Reliable interior lock protects mated connectors from

accidental disconnection.

2. Increased Contact Retention of Crimped

Contacts and Prevention of Incomplete

Insertion

Separate contact retainer increases the contact

retention, assures and visually confirms the complete

contact insertion.

3. Molded-in Contact Retention Tabs

Handling of terminated contacts during the assembly and

termination is easier and avoids entangling of wires,

since there are no protruding metal tabs.

4. Incorrect Insertion Prevention

Guide post

Connectors are polarized to assure correct mating with

corresponding parts.

Board Eyelet mounting

5.Solder Crack Prevention

Glass reinforced resin is used in the pin header bodies to

prevent solder cracks caused by the heat shrinkage.

6. Prevention of Incorrect Board Placement

Built-in locating posts assure correct connector

placement and orientation on the board.(2-12 pos.)

7. Supports Sealing after Installation.

Sealing compound can be applied to the board installed

connector for distance of 6 mm max. from the mounting

surface (9 mm max. for single position).

8.Cost Effective Tooling

The same crimping tools are used to terminate socket

and pin contacts.

One pos. type can also be mounted

to boards that have eyelets.

9. Prevention of Short Circuits between

Adjacent Contacts

Each contact is completely surrounded by the insulator

housing, electrically isolating it from adjacent contacts.

Continued.

B95

12 3 4 5 6 7...15

下载PDF

与DF7-12DP-3.96DSA相关器件

型号	品牌	描述	获取价格	数据表
DF7-12DS-3.96C	HRS	3.96 mm Pitch Miniature Connectors for Intern	获取价格
DF7-1618PC	HRS	3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed)	获取价格
DF7-1618PCF	HRS	3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed)	获取价格
DF7-1618SC	HRS	3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed)	获取价格
DF7-1618SCF	HRS	3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed)	获取价格
DF7-1DP-3.96C	HRS	3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed)	获取价格