3D3522
MONOLITHIC MANCHESTER
DECODER
3
delay
(SERIES 3D3522)
devices, inc.
FEATURES
PACKAGES
•
All-silicon, low-power CMOS
RX
N/C
N/C
CLK
N/C
N/C
1
2
3
4
5
6
7
14
13
12
11
10
9
VDD
N/C
technology
•
•
3.3V operation
N/C
N/C
N/C
N/C
CMOS compatible inputs and
outputs
RX
CLK
N/C
1
2
3
4
8
7
6
5
VDD
N/C
N/C
•
Vapor phase, IR and wave
solderable
•
•
•
•
Auto-insertable (DIP pkg.)
Low ground bounce noise
Maximum data rate: 50 MBaud
Data rate range: ±15%
GND
8
DATB
GND
DATB
3D3522-xxx
DIP (.300)
3D3522M-xxx DIP (.300)
3D3522G-xxx Gull Wing (.300)
3D3522D-xxx SOIC (.150)
3D3522H-xxx Gull Wing (.300)
3D3522Z-xxx SOIC (.150)
For mechanical dimensions, click here.
For package marking details, click here.
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The 3D3522 product family consists of monolithic CMOS Manchester
Decoders. The unit accepts at the RX input a bi-phase-level,
embedded-clock signal. In this encoding mode, a logic one is
represented by a high-to-low transition within the bit cell, while a logic
zero is represented by a low-to-high transition. The recovered clock
and data signals are presented on CLK and DATB, respectively, with
RX
Signal Input
CLK
Signal Output (Clock)
DATB Signal Output (Data)
VDD +3.3 Volts
GND Ground
the data signal inverted. The operating baud rate (in MBaud) is specified by the dash number. The input
baud rate may vary by as much as ±15% from the nominal device baud rate without compromising the
integrity of the information received.
Because the 3D3522 is not PLL-based, it does not require a long preamble in order to lock onto the
received signal. Rather, the device requires at most one bit cell before the data presented at the output is
valid. This is extremely useful in cases where the information arrives in bursts and the input is otherwise
turned off.
The all-CMOS 3D3522 integrated circuit has been designed as a reliable, economic alternative to hybrid
Manchester Decoders. It is CMOS-compatible and is offered in standard 8-pin and 14-pin auto-insertable
DIPs and space saving surface mount 8-pin and 14-pin SOICs.
TABLE 1: PART NUMBER SPECIFICATIONS
PART
BAUD RATE (MBaud)
NUMBER
3D3522-0.5
3D3522-1
Nominal
Minimum
0.43
Maximum
0.50
1.00
5.00
0.57
1.15
0.85
3D3522-5
4.25
5.75
3D3522-10
3D3522-20
3D3522-25
3D3522-50
10.00
20.00
25.00
50.00
8.50
11.50
23.00
28.75
57.50
17.00
21.25
42.50
NOTES: Any baud rate between 0.5 and 50 MBaud not shown is also available at no extra cost.
2006 Data Delay Devices
Doc #06005
5/8/2006
DATA DELAY DEVICES, INC.
1
3 Mt. Prospect Ave. Clifton, NJ 07013