CY8CMBR2016
CapSense® Express™ 16 Button Matrix
Controller
Capacitive Button Controllers
■ Industrial temperature range: –40 °C to + 85 °C
■ 48-pin QFN package (6 × 6 × 0.6 mm)
Features
■ Hardware configurable Matrix CapSense® controller
❐ Does not require software tools or programming
❐ 16 buttons can be configured individually or as a matrix
❐ Supports 3x4 and 4x4 matrix configurations
Overview
The CY8CMBR2016 CapSense Express capacitive touch
sensing controller incorporates several innovative features to
save time and money to quickly enable a capacitive touch
sensing user interface in your design. It is a hardware
configurable device and does not require any software tools,
firmware coding or device programming. This device is enabled
with Cypress's revolutionary SmartSense auto-tuning algorithm.
SmartSense auto-tuning ends the need to manually tune the
user interface during development and production ramp. This
speeds the time to volume and saves valuable engineering time,
test time, and production yield loss.
■ Matrix Host Interface Communication
❐ Industry-standard host interface protocols reuse existing
host processor firmware
• Key Scan Interface
• Truth Table Interface
❐ Encoded GPO Interface - minimizes number of pins required
■ SmartSense™ Auto-Tuning
❐ Maintains optimal button performance even in noisy
environments
The device supports up to 16 capacitive touch buttons that can
be organized in any format, such as a matrix array. With its
backward compatible key scan interface, it can enable users to
achieve quick-to-market (retrofit) designs in large keypad
applications such as fire alarm control panels, security systems,
and door locks. Any application that requires up to 16 CapSense
buttons can utilize CY8CMBR2016.
❐ CapSense parameters dynamically set in runtime
❐ Wide parasitic capacitance (CP) range (5–40 pF)
❐ Saves time and effort in device tuning
■ Noise immunity
❐ High sensitivity, low-noise capacitive sensing algorithm
❐ Strong immunity to RF and AC noise
❐ Low radiated noise emission
The wide operating range of 1.71 V to 5.5 V enables unregulated
battery operation, further saving component cost. This device
supports ultra low-power consumption in both run mode and
deep sleep mode to stretch battery life. In addition, this device
also supports many advanced features, which enhance the
robustness and user interface of the end solution. Some of the
key advanced features include Noise Immunity and FSS. Noise
Immunity improves the immunity of the device against radiated
and conducted noise, such as audio and radio frequency (RF)
noise. FSS provides robust sensing even with closely spaced
buttons. FSS is a critical requirement in small form factor
applications.
■ System diagnostics of CapSense buttons
❐ Reports any faults at device power up
❐ Button shorts
❐ Improper value of modulating capacitor (CMOD
)
❐ Parasitic capacitance (CP) out of range
■ Advanced features
❐ Flanking Sensor Suppression (FSS) provides robust sensing
even with closely spaced buttons
❐ Buzzer Signal Output
The CY8CMBR2016 provides three different host interface
communication modes. These include the industry standard host
interface protocols such as Key Scan Interface and Truth Table
Interface. These two protocols reuse existing host processor
firmware leading to easy conversion of existing mechanical
buttons to CapSense. The third host interface communication is
the Encoded GPO Interface with a 4-bit output, which minimizes
the number of pins required for a button output. These three
outputs are configurable which helps provide a wide variety of
device usage in multiple applications.
❐ Configurable sensitivity for all buttons
❐ Interrupt line to host to indicate any CapSense button status
change
❐ Serial Debug Data out
• Simplifies production line testing and system debug
■ Wide operating range
❐ 1.71–5.5 V
❐ Ideal for both regulated and unregulated battery
applications [1]
Serial Debug Data output gives the critical information about the
design, such as button CP and raw counts. This further helps in
production line testing.
■ Low power consumption
❐ Supply current in run mode as low as 20 µA[2] per button
❐ Deep sleep current: 100 nA
Notes
1. Supply variation should not be more than 5% for proper CapSense operation
2. Power consumption calculated with 250 ms scan time, 2% touch time and C of each button < 19 pF.
P
Cypress Semiconductor Corporation
Document Number: 001-67921 Rev. *F
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised April 21, 2017
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
