Philips Semiconductors
Product specification
Video driver hybrid amplifier
CR2424S
CHARACTERISTICS
T
mb = 25 °C; CL = 8.5 pF; measured in test circuit (see Fig.10); unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN.
VS = 60 V; output swing = 40 V (p-p) with 30 V (DC) offset; unless otherwise specified
TYP.
MAX.
UNIT
IS
VI
tr
supply current
input and output open
input and output open
10 to 90%; note 1
39
1.3
−
45
51
mA
input voltage (DC)
1.6
2.3
2.1
1.9
2.9
2.6
V
rise time transient response
fall time transient response
ns
ns
tf
10 to 90%; note 1
−
VS = 65 V; output swing = 50 V (p-p) with 32.5 V (DC) offset; unless otherwise specified
IS
VI
tr
supply current
input and output open
input and output open
10 to 90%; note 2
−
50
57
mA
V
input voltage (DC)
1.4
−
1.75
2.5
2.2
2.1
3.2
3.2
rise time transient response
fall time transient response
ns
ns
tf
10 to 90%; note 2
−
VS = 60 or 65 V; output swing = 40 or 50 V (p-p) with 30 or 32.5 V (DC) offset; unless otherwise specified
Ptot
BW
Vtilt
Vos
NLN
AV
total power dissipation
small-signal bandwidth
low frequency tilt voltage
overshoot voltage
non-linearity
50 MHz square wave
−
4.6
145
1.3
3
6
W
between −3 dB points; note 3 130
−
MHz
V
1 kHz square wave
varied by C1; see Fig.10
VO = 5 to 55 V
−
1.5
10
5
−
%
−
2
%
DC voltage gain
50 Ω source; note 4
50 Ω source; note 5
11.2
160
12.4
180
13.2
200
VG
insertion gain
Notes
1. Input signal is a 100 kHz square wave of 3.25 V (p-p), with 1.5 V (DC) offset (50 Ω source).
2. Input signal is a 100 kHz square wave of 3.4 V (p-p), with 1.65 V (DC) offset (50 Ω source).
3. Sine wave output signal: 1 V (p-p).
4. Measured VO/VI (Figs 2 and 6) at input test circuit (see Fig.10).
5. Measured VO/VI (Figs 3 and 7) at input module (see Fig.10).
1995 Oct 23
3