Model C10A50Z4
Surface Mount Termination
10 Watts, 50Ω
Description
The C10A50Z4 is high performance RoHS compliant Alumina (Al2O3)
surface mount termination intended as a lower cost alternative to
Aluminum Nitride (AlN) and Beryllium Oxide (BeO). The termination is
well suited to all cellular frequency bands such as; AMPS, GSM, DCS,
PCS, PHS and UMTS. The high power handling makes the part ideal for
terminating 90 degree hybrid directional couplers, and for use in isolators.
General Specifications
Resistive Element
Substrate
Thick film
Alumina Ceramic
Matte Tin over Nickel
-55 to +125°C (see chart)
Features:
Terminal Finish
Operating Temperature
• 10 Watts
Tolerance is 0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
• Lowest Cost
• RoHS Compliant
• Alumina Ceramic
Electrical Specifications
Resistance Value:
Power:
50 ohms, 2%
10 Watts
• Non-Nichrome Resistive
Element
Frequency Range:
V.S.W.R.:
Specification based on unit properly installed using suggested mounting instructions
DC – 3.0 GHz
<1.25:1
• Low VSWR
and a 50 ohm nominal impedance. Specifications subject to change without notice
• 100% Tested
Outline Drawing
All dimensions in inches.
07/26/2006 Rev. B
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe: