HIGH PERFORMANCE
THERMOELECTRIC COOLERS
C10372, C10373 SERIES
The C10372 series and C10373 series are water-cooled thermoelectric coolers designed to reduce thermal electrons emitted
from the photocathode of photomultiplier tubes (PMTs) in order to improve signal-to-noise ratio (S/N ratio). The C10372 series
further contains an electrostatic and magnetic shield that minimizes the influence of the ambient environment.
The C10372 series are for 28 mm, 38 mm and 51 mm diameter head-on PMTs, while the C10373 series are for MCP-PMTs.
FEATURES
GThermoelectric cooling using peltier module
GAbout -30 °C cooling temperature (with +20 °C cooling water)
GEvacuated, double-pane window with heater for frost prevention
GBuilt-in electrostatic and magnetic shielding (C10372 series)
GInternal protective circuit safeguards Peltier element module in
case of low water
GInternal protection circuits prevent output short-circuit, output
overvoltage, and excessive temperature rise in power supply
GStable operation due to a regulated power supply
Left: Power Supply Right: Cooled PMT Housing
SPECIFICATIONS
COOLED PMT HOUSING
Parameter
Description / Value
Thermoelectric cooling using peltier module
Water
Cooling Method
Heat Exchange Medium
Amount of Cooling Water
1 L/min to 3 L/min (water pressuere: below 0.3 MPa)
Approx. -30 °C
Cooling Temperature (with cooling water at +20 °C)
Temperature Controllable Range (with cooling water at +20 °C)
Cooling Time
-30 °C to 0 °C (continuously adjustable)
Approx. 120 min
Optical Window Material
Evacuated double-pane synthetic silica window with heater (185 nm to 2200 nm)
28 mm (1-1/8") Dia., 38 mm (1-1/2") Dia. and 51 mm (2") Dia. Head-on
MCP-PMT (R3809U-50 Series, R3809U-61/-63/-64)
E2762 Series A
C10372 series
C10373 series
Applicable PMTs (sold separately)
Applicable Socket Assembly (sold separately) C10372 series
Applicable PMT Holder (sold separately) C10373 series
Operating Ambient Temperature / Humidity B
Storage Temperature / Humidity B
E3059-500 (R3809U-50 Seriess, R3809U-61/-63/-64)
+5 °C to +40 °C / Below 75 %
-15 °C to +50 °C / Below 80 %
C10372 5.8 kg / C10373 5.5 kg
Weight
NOTE: ASee P.2
BNo condensation
POWER SUPPLY
Parameter
Description / Value
C10372, C10373
100 V 10 V (50 Hz / 60 Hz)
AC Input Voltage
C10372-01, C10373-01
C10372-02, C10373-02
120 V 12 V (50 Hz / 60 Hz)
240 V 24 V (50 Hz / 60 Hz)
Power Consumption
Output Voltage
200 V·A
24 V to 27 V
Output Current
4.2 A
Protective circuits to safeguard Peltier element module in case of low water and to prevent
output short-circuit, output overvoltage, and excessive temperature rise in power supply.
+5 °C to +40 °C / Below 75 %
Protection Circuit
Operating Ambient Temperature / Humidity B
Storage Temperature / Humidity B
Weight
-15 °C to +50 °C / Below 80 %
2.1 kg
NOTE: BNo condensation
COMPONENTS AND ACCESSORIES
GCooled PMT housing (Including an input window) GPower supply GLight shield cap GWater hose clamps (2 pcs)
G
Connection cable (1.5 m)
G
AC line cable (2.5 m: -02 type, 2.0 m: other types)
GSocket assembly / PMT holder mounting screw (4 pcs)
* To use these coolers, water hoses with an inner diameter of 15 mm and a water supply line with the matching round faucet are required. Prepare
those hoses of the desired length. In addition, prepare a filter for removing impurities such as chlorine ions.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.