60V SELF-PROTECTED LOW-SIDE
INTELLIFET MOSFET SWITCH
Product Summary
Features and Benefits
Continuous Drain Source Voltage: VDS = 60V
On-State Resistance: 550mΩ
Short Circuit Protection with Auto Restart
Over Voltage Protection (Active Clamp)
Thermal Shutdown with Auto Restart
Over-Current Protection
Nominal Load Current (VIN = 5V) : 1.4A
Clamping Energy: 550mJ
Input Protection (ESD)
Load Dump Protection (Actively Protects Load)
Logic Level Input
Description
The BSP75GQ is a Self-protected low-side MOSFET. It features
monolithic over temperature, over current, over voltage (active clamp)
and ESD protected logic level functionality. It is intended as a general
purpose switch.
High Continuous Current Rating
Lead-Free Finish; RoHS Compliant (Note 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
Applications
Especially Suited for Loads with a High In-Rush Current such as
Lamps and Motors
Mechanical Data
All Types of Resistive, Inductive and Capacitive Loads in
Switching Applications
Case: SOT223 (Type DN)
Case Material: Molded Plastic, “Green” Molding Compound
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish e3
μC Compatible Power Switch for 12V and 24V DC Applications
Automotive Rated
Replaces Electromechanical Relays and Discrete Circuits
Linear Mode Capability - the current-limiting protection circuitry is
designed to de-activate at low VDS to in order not to compromise
the load current during normal operation. The maximum DC
operating current is therefore determined by the thermal
capability of the package/board combination, rather than by the
protection circuitry.
Weight: 0.112 grams (Approximate)
SOT223 (Type DN)
Top View
Pin Out
Top View
Note:
The tab is connected to the drain pin, and must be electrically isolated from the source pin. Connection of significant copper to the tab is recommended for
best thermal performance.
Ordering Information (Note 5)
Product
BSP75GQTA
BSP75GQTC
Marking
BSP75G
BSP75G
Reel Size (inches)
Tape Width (mm)
Quantity per Reel
1,000 Units
7
13
12
12
4,000 Units
Notes:
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Refer to https://www.diodes.com/quality/.
5. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.
IntelliFET is a trademark of Diodes Incorporated.
1 of 8
www.diodes.com
June 2018
© Diodes Incorporated
BSP75GQ
Document number: DS37144 Rev. 5 - 2