Datasheet
2.7 V to 5.5 V Input, 600 mA
Single Synchronous Buck DC/DC Converter
for Automotive
BD9SD11NUX-C
General Description
Key Specifications
BD9SD11NUX-C is a synchronous buck DC/DC
Converter with built-in low On Resistance power
MOSFETs. It is capable of providing current up to 600
mA. Small inductor is applicable due to high switching
frequency of 2.2 MHz. It is a current mode control
DC/DC Converter and features high-speed transient
response. It has an integrated feedback resistor that
sets the output voltage to 1.15 V and a built-in phase
compensation circuit. Applications can be created with
a few external components.
Input Voltage:
2.7 V to 5.5 V
1.15 V (Typ)
600 mA (Max)
2.2 MHz (Typ)
270 mΩ (Typ)
180 mΩ (Typ)
0 μA (Typ)
Output Voltage:
Output Current:
Switching Frequency:
High Side FET ON Resistance:
Low Side FET ON Resistance:
Shutdown Circuit Current:
Operating Temperature:
-40 °C to +125 °C
Package
VSON008X2020
W (Typ) x D (Typ) x H (Max)
2.00 mm x 2.00 mm x 0.60 mm
Features
AEC-Q100 Qualified (Note 1)
Single Synchronous Buck DC/DC Converter
Adjustable Soft Start Function
Power Good Output
Input Under Voltage Lockout Protection (UVLO)
Short Circuit Protection (SCP)
Output Over Voltage Protection (OVP)
Over Current Protection (OCP)
Thermal Shutdown Protection (TSD)
(Note 1) Grade 1
Applications
Automotive Equipment
Other Electronic Equipment
Typical Application Circuit
VIN
VIN
PGD
SW
CIN1
VEN
VOUT
EN
SS
L1
COUT1
GND
VOUT
Figure 1. Application Circuit
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2020 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0J2J0AA01520-1-2
25.Feb.2020 Rev.001
1/29